ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: 12v PA Amplifier  (Read 3059 times)

Lee Wright

  • Full Member
  • ***
  • Offline Offline
  • Posts: 121
12v PA Amplifier
« on: March 31, 2011, 07:38:56 AM »

Hi People,

It looks like I'll be doing some small PA work where there's no power.   I have a system with 2 x Bose 302A's which are a small box with 3 drivers rated at 6Ohms per box & 100watts.  I've tried powering my Bose 1600 amp off an inverter but it uses 90 watts just on idle which is way too much.  Since I don't need much power for these events (mainly just for speech for weddings) I thought I'd try my luck with a decent car amplifier.   I tried a Clarion 4241 which bridged is 200 watts per channel.  The results were a bit disappointing.   It seems to distort very easily.  I can't really tell where the problem is because it doesn't seem to have a clip indicator on the amp.  It has RCA input which I'm driving off the left XLR out of my mixer (Soundcraft M8).  I'm wondering if there is an issue with impedence between the mixer and the amp.  Not sure what to do.  Appreciate any thoughts.


ProSoundWeb Community

12v PA Amplifier
« on: March 31, 2011, 07:38:56 AM »

Pages: [1]   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.022 seconds with 20 queries.