ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Shure UR3 TX Lock on full gain...  (Read 1462 times)

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1340
    • Best Audio
Shure UR3 TX Lock on full gain...
« on: December 11, 2015, 03:13:22 pm »

I am currently on a show which is using 30 Shure UR3 plug on XLR transmitters with AKG Condenser mics.

Intermittently a preamp or mic "LOCKS" on full gain...it has been reported. I haven't seen it personally yet but earsplitting feedback was the first indicator.

Before I could look at the TX, the A2s had power cycled it.  In case it's caused by too much input, I had the preamp turned down 6 dB in the transmitter.  So far this has not been duplicated however the company says they have experienced it with UR3 in China.

Has anyone experienced this?
« Last Edit: December 11, 2015, 03:46:44 pm by Pete Erskine »
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1340
    • Best Audio
Re: Shure UR3 TX Lock on full gain...
« Reply #1 on: December 11, 2015, 10:05:26 pm »

It's interesting...

I posted this same note on Facebook and in less than 5 hours had responses from around the world which probably pinpointed the problem...
« Last Edit: December 11, 2015, 10:08:22 pm by Pete Erskine »
Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

ProSoundWeb Community

Re: Shure UR3 TX Lock on full gain...
« Reply #1 on: December 11, 2015, 10:05:26 pm »


Pages: [1]   Go Up
 



Page created in 0.048 seconds with 23 queries.