ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Freespeak 2 & RTS  (Read 1811 times)

Neil White

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 274
Freespeak 2 & RTS
« on: December 04, 2015, 04:17:25 pm »

Hi all,

Has anyone got experience of interfacing freespeak 2 with rts two wire? I'm trying to interface a pair of channels, and as soon as they are connected the level of that channel on the two wire side drops by around half. It's definitely selected in RTS mode, and the auto nulling sequence makes no difference. There also seems to be some spurious pulsed  hf noise on the channel that is triggering the call light on the BP325s.

I have another pair of channels interfaced as 4w, and they are working perfectly.

Thanks,
Neil
Logged

Pete Erskine

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1340
    • Best Audio
Re: Freespeak 2 & RTS
« Reply #1 on: December 04, 2015, 06:55:24 pm »

Hi all,

Has anyone got experience of interfacing freespeak 2 with rts two wire? I'm trying to interface a pair of channels, and as soon as they are connected the level of that channel on the two wire side drops by around half. It's definitely selected in RTS mode, and the auto nulling sequence makes no difference. There also seems to be some spurious pulsed  hf noise on the channel that is triggering the call light on the BP325s.

I have another pair of channels interfaced as 4w, and they are working perfectly.

Thanks,
Neil


In the 2wire setting in FSII turn off the termination.


Logged
Pete Erskine
917-750-1134
www.bestaudio.com
peter@bestaudio.com

Neil White

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 274
Re: Freespeak 2 & RTS
« Reply #2 on: December 05, 2015, 10:00:08 am »


In the 2wire setting in FSII turn off the termination.

Thanks Pete, had been working from the front panel and couldn't see that option. The unit also needed a firmware update. All sorted now.
Logged

ProSoundWeb Community

Re: Freespeak 2 & RTS
« Reply #2 on: December 05, 2015, 10:00:08 am »


Pages: [1]   Go Up
 



Page created in 0.079 seconds with 24 queries.