Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Stephen Snipes]

I put an O-Clamp on the back of my quad box and clamp it to the top part of the T-Bar.  It has a 15' cord on it just so it will reach the ground with a little slack if needed.  I just take the clamp off when done.  I'll go grab it out the van and take a pic once the rain stops here.

[James Feenstra]

Thomann do a special t-bar
 with built in power/dmx connectors spaced along the bar with powercon in/out at then ends. mabey someone does one with us outlets (although if you can get similar sized US outlets it could be easily modified).
http://www.thomann.de/gb/stairville_led_powerdmx_bar.htm

how is the DMX wired through these? opto isolated, or just split off with basically a Y connection?

[Dave Scarlett]

Maybe this?

http://www.ebay.com/itm/181925186670?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[William Schnake]

Is there any simple way to clean up this unsightly mess?

I want to either build or attach a distribution box onto the top bar, but I don't want a 15 foot cable hanging from the bar when I transport. I have considered a box with a Powercon connector like the Chauvet PowerStream 4 Splitter, but I need a fifth outlet for the wireless receiver.

Any other options out there for 120V US?

We are getting ready to re-do our LED Par Bars.  We are running all of the DMX on the inside and we are adding a single Edison box to each with PowerCon in and out.  We are going to connect all of the electrical from each light to the power con.  1 DMX in, 1 DMX out and connect a Power Con each way.  Should look nice and neat.  I'll post a pic when we get one done.

Bill

[Daniel Levi]

how is the DMX wired through these? opto isolated, or just split off with basically a Y connection?

According to the reviews y split essentially, so just like the power connections.

[James Feenstra]

According to the reviews y split essentially, so just like the power connections.

I forsee that causing a significant number of potential problems...

[ProSoundWeb Community]