ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Presonus Faders  (Read 892 times)

Greg Percy

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 60
Presonus Faders
« on: October 20, 2015, 08:48:46 am »

Good Morning- On my 24.4.2 one of my faders (ch 24) was going wacko so I thought I'd replace it...Of note, presonus faders on 24.4.2 are in banks of 8,7,7&7 (Of course I assumed 8,8,8 and masters-so that was two trips to full compass...doh) Replacing fader bank was fairly simple, although aligning the little plastic spacers took some doing-also faders were at one end of board--middle faders would be tougher to do...Also remember that if you put your phone inside for light, remember to take it out before you screw in the 20 screws necessary---does add an interesting inner glow however :o...Happy Tuesday

ProSoundWeb Community

Presonus Faders
« on: October 20, 2015, 08:48:46 am »

Pages: [1]   Go Up

Page created in 0.036 seconds with 22 queries.