ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Wireless Mic Custom Foam- Rack Draw Style  (Read 3893 times)

Brandon Scopel

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 251
Wireless Mic Custom Foam- Rack Draw Style
« on: September 30, 2015, 10:25:28 am »

Hey all,

I have just purchased three of the ULXP handheld/body pack combos. They all came with rack mount hardware so they will be racked with a antenna combiner soon. I have seen people with rack drawers that have custom cutouts for 4 handhelds and 4 body packs. Where can I find these? I see Audiopile has the pick&pluck stuff, but that gets sloppy after awhile. I don't have any rack drawers that are not in use, so if it comes as a package that's fine.

Thoughts?
Logged

DavidTurner

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 318
Re: Wireless Mic Custom Foam- Rack Draw Style
« Reply #1 on: September 30, 2015, 01:46:16 pm »

Any case company can do this for you. My favorite is my old friend Jed at JXL custom cases: 615-390-0342

Hey all,

I have just purchased three of the ULXP handheld/body pack combos. They all came with rack mount hardware so they will be racked with a antenna combiner soon. I have seen people with rack drawers that have custom cutouts for 4 handhelds and 4 body packs. Where can I find these? I see Audiopile has the pick&pluck stuff, but that gets sloppy after awhile. I don't have any rack drawers that are not in use, so if it comes as a package that's fine.

Thoughts?
Logged

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6234
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: Wireless Mic Custom Foam- Rack Draw Style
« Reply #2 on: September 30, 2015, 02:03:28 pm »

Any case company can do this for you. My favorite is my old friend Jed at JXL custom cases: 615-390-0342

I forgot who did our drawer for us.  I do remember if they don't have a mic template that you have to trace it for them.  I believe it is cut with a water jet.

I am going to call Jed too because I forgot who did ours.  I think they were in Youngstown.

Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

Brian Adams

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 468
    • Adams Production Services
Re: Wireless Mic Custom Foam- Rack Draw Style
« Reply #3 on: October 01, 2015, 03:40:24 pm »

Just buy one of these:

http://www.gatorcases.com/p/217102-2322/grw-drwwrlss

I have a couple, and while they're a little heavy, they're absolutely great. I had to trim the foam on the beltpack side of the drawer, since the ULX packs are a little tight in there, and I pulled out the AA battery foam on the other side to make room for 9V batteries. The drawers make it look like I'm super organized.

FWIW, I'll be pulling a UA844 antenna distro out of one of my racks soon, if you want to make a deal.
Logged
Brian Adams
Adams Production Services
Vermillion, SD
adamsproductionservices.com

Tom Burgess

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 353
Re: Wireless Mic Custom Foam- Rack Draw Style
« Reply #4 on: October 02, 2015, 10:26:11 am »

Just buy one of these:

http://www.gatorcases.com/p/217102-2322/grw-drwwrlss

I have a couple, and while they're a little heavy, they're absolutely great. I had to trim the foam on the beltpack side of the drawer, since the ULX packs are a little tight in there, and I pulled out the AA battery foam on the other side to make room for 9V batteries. The drawers make it look like I'm super organized.

FWIW, I'll be pulling a UA844 antenna distro out of one of my racks soon, if you want to make a deal.
I've used this one before with good results as well.  It was for an AKG rig so I didn't have to customize for batteries.
Logged
If the band sounds great, it's because the band IS great, if the band sound like crap, it's the soundman's fault.

Opinions expressed by me on this forum are my own and not necessarily those of the company for which I work.

eric lenasbunt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 864
    • Bunt Backline Event Services, LLC
Re: Wireless Mic Custom Foam- Rack Draw Style
« Reply #5 on: October 03, 2015, 08:56:31 pm »


I've used this one before with good results as well.  It was for an AKG rig so I didn't have to customize for batteries.

I too like this drawer, but dang it's heavy!
Logged

Brandon Scopel

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 251
Re: Wireless Mic Custom Foam- Rack Draw Style
« Reply #6 on: October 04, 2015, 07:21:01 am »

Just buy one of these:

http://www.gatorcases.com/p/217102-2322/grw-drwwrlss

I have a couple, and while they're a little heavy, they're absolutely great. I had to trim the foam on the beltpack side of the drawer, since the ULX packs are a little tight in there, and I pulled out the AA battery foam on the other side to make room for 9V batteries. The drawers make it look like I'm super organized.

FWIW, I'll be pulling a UA844 antenna distro out of one of my racks soon, if you want to make a deal.

I do like the looks of that, it also is not just for a single type of wireless.

I'm definitely interested in the 844.
Logged

Pete Bansen

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 92
Re: Wireless Mic Custom Foam- Rack Draw Style
« Reply #7 on: October 07, 2015, 12:27:24 am »

I have seen people with rack drawers that have custom cutouts for 4 handhelds and 4 body packs.

I have been very pleased with custom foam work by My Case Builder
http://www.mycasebuilder.com/

I bought cases with custom foam from them for several pair of recording mics and they do a great job for a reasonable price.  If you buy a drawer from one of the may vendors who sell them, you could have the inserts made by these folks and have a great package.
Logged

ProSoundWeb Community

Re: Wireless Mic Custom Foam- Rack Draw Style
« Reply #7 on: October 07, 2015, 12:27:24 am »


Pages: [1]   Go Up
 



Page created in 0.022 seconds with 19 queries.