ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Fiber Polarity on an audio network (Yamaha/Dante)  (Read 3504 times)

John Penkala

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 510
Fiber Polarity on an audio network (Yamaha/Dante)
« on: September 14, 2015, 04:40:15 pm »

      I am building racks for a multiple Yamaha RIO/Dante network. I'm using Cisco SG300 troughout the network with the LX GBIC modules. I have some panels fitted with OpticalCon Duo connectors that use either LC (A to A) or LC (A to B) patch cables. Currently, I am planning to use the LC (A to A) patch cables inside the racks and reverse the polarity on the long fiber cables (500-1000ft) used to connect the different racks together. This seems to be the most logical way to configure the system as there will be many different racks used in different configurations.  Is there a standard or best practice for configuring fiber or is whatever works the norm? Thanks.

JP
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6942
  • Audio Plumber
Re: Fiber Polarity on an audio network (Yamaha/Dante)
« Reply #1 on: September 14, 2015, 07:34:16 pm »

      I am building racks for a multiple Yamaha RIO/Dante network. I'm using Cisco SG300 troughout the network with the LX GBIC modules. I have some panels fitted with OpticalCon Duo connectors that use either LC (A to A) or LC (A to B) patch cables. Currently, I am planning to use the LC (A to A) patch cables inside the racks and reverse the polarity on the long fiber cables (500-1000ft) used to connect the different racks together. This seems to be the most logical way to configure the system as there will be many different racks used in different configurations.  Is there a standard or best practice for configuring fiber or is whatever works the norm? Thanks.

JP

If it was me, I'd have the cables be straight through in case you have to extend them. A-B cables change their configuration every time you extend them.

Mac
Logged

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1765
  • So. Dak.
    • Sturz Audio
Re: Fiber Polarity on an audio network (Yamaha/Dante)
« Reply #2 on: September 14, 2015, 11:36:12 pm »

If it was me, I'd have the cables be straight through in case you have to extend them. A-B cables change their configuration every time you extend them.

Mac

I have really only used fiber in installs so I haven't ever thought about this.  Do you need to have A racks and B racks.   Where one is normal and one is reversed?
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6942
  • Audio Plumber
Re: Fiber Polarity on an audio network (Yamaha/Dante)
« Reply #3 on: September 15, 2015, 01:23:21 am »

I have really only used fiber in installs so I haven't ever thought about this.  Do you need to have A racks and B racks.   Where one is normal and one is reversed?

Yes, but isn't that how you go about wiring a network anyway?

Mac
Logged

John Penkala

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 510
Re: Fiber Polarity on an audio network (Yamaha/Dante)
« Reply #4 on: September 15, 2015, 09:32:39 am »

If it was me, I'd have the cables be straight through in case you have to extend them. A-B cables change their configuration every time you extend them.

Mac


Mac,
      I was hoping you would respond.  Thank you. You got me thinking.  I think I should designate one pair of fiber connections on the panel as inputs and the other pair as outputs. I could then use the reversed polarity LC patches (A-B) just on the inputs of all of the racks and keep the outputs wired (A-A) and use straight (A-A) cables to connect the racks. I'm guessing this is how it's normally done.

JP
Logged

Bob Leonard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6807
  • Boston, MA USA
Re: Fiber Polarity on an audio network (Yamaha/Dante)
« Reply #5 on: December 28, 2015, 10:07:00 pm »

Correct, and depending on the manufacturer the panel will be enclosed and partitioned to segregate the ins from the outs, the A from the B. Don't skimp on the panels.
Logged
BOSTON STRONG........
Proud Vietnam Veteran

I did a gig for Otis Elevator once. Like every job, it had it's ups and downs.

ProSoundWeb Community

Re: Fiber Polarity on an audio network (Yamaha/Dante)
« Reply #5 on: December 28, 2015, 10:07:00 pm »


Pages: [1]   Go Up
 



Page created in 0.043 seconds with 23 queries.