ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 3 [4]   Go Down

Author Topic: DMX over mic cables  (Read 13103 times)

Lyle Williams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1558
Re: DMX over mic cables
« Reply #30 on: October 04, 2015, 10:10:05 AM »
If you aren't using a terminator you are committing a sin an order of magnitude worse than using mic cable.  :-)

Logged

Rob Spence

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3531
  • Boston Metro North/West
    • Lynx Audio Services
Re: DMX over mic cables
« Reply #31 on: October 04, 2015, 12:08:47 PM »
Quote from: Scott Holtzman on October 04, 2015, 08:33:34 AM
I think a good take away is if you are going to take the risk use a terminator.

Also as I don't like the term semi pro,  how about pro serving undeserved low end of market?

The funny thing is that cables are such a small amount of the expense get the right ones. 

I learned the hard way and bought cheap dmx cables.  while the impedance may have been right the quality of construction caused more failures than using mic cable ever would.





Sent from my SM-T800 using Tapatalk

Scott, I presume you meant under served?

I bought a couple of spools of DMX cable, added Neutrik connectors. And use an opti splitter with terminators.


Sent from my iPad using Tapatalk HD
Logged
rob at lynxaudioservices dot com

Dealer for: AKG, Allen & Heath, Ashley, Astatic, Audix, Blue Microphones, CAD, Chauvet, Community, Countryman, Crown, DBX, Electro-Voice, FBT, Furman, Heil, Horizon, Intellistage, JBL, Lab Gruppen, Mid Atlantic, On Stage Stands, Pelican, Peterson Tuners, Presonus, ProCo, QSC, Radial, RCF, Sennheiser, Shure, SKB, Soundcraft, TC Electronics, Telex, Whirlwind and others

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7557
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: DMX over mic cables
« Reply #32 on: October 04, 2015, 07:19:33 PM »
Quote from: Rob Spence on October 04, 2015, 12:08:47 PM
Scott, I presume you meant under served?

I bought a couple of spools of DMX cable, added Neutrik connectors. And use an opti splitter with terminators.


Sent from my iPad using Tapatalk HD
Rob, yes under served.    I also used an active splitter before I went wireless

Sent from my SM-T800 using Tapatalk

Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

ProSoundWeb Community

Re: DMX over mic cables
« Reply #32 on: October 04, 2015, 07:19:33 PM »

Pages: 1 2 3 [4]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.036 seconds with 23 queries.