ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Podium mic to phantom to wireless body pack  (Read 1786 times)

tkroeker

  • Guest
Podium mic to phantom to wireless body pack
« on: August 06, 2015, 02:16:58 pm »

Does anyone know if this would work?

I have an Audio Technica boundry mic ( AT871R) and I want to use it on a podium and be wireless.

If I hook the mic into an AT 8531 phantom, then into a lavaleir transmitter ( senheiser SK100). Would the phantom overpower the transmitter or distort or blow it up ?

Thanks
T
Logged

g'bye, Dick Rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7424
  • Duluth
Re: Podium mic to phantom to wireless body pack
« Reply #1 on: August 06, 2015, 02:21:29 pm »

You could skip the PZM and just use the lav mic in a boundary config.
Logged
Pay no attention to the man behind the curtain...

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6828
  • Audio Plumber
Re: Podium mic to phantom to wireless body pack
« Reply #2 on: August 06, 2015, 02:30:14 pm »

Does anyone know if this would work?

I have an Audio Technica boundry mic ( AT871R) and I want to use it on a podium and be wireless.

If I hook the mic into an AT 8531 phantom, then into a lavaleir transmitter ( senheiser SK100). Would the phantom overpower the transmitter or distort or blow it up ?

Thanks
T

If you want to maximize the battery life of the transmitter, add a battery phantom supply between the pack and the mic. I have done this many times in order to get lecterns quickly on and off stage.

Mac
Logged

ProSoundWeb Community

Re: Podium mic to phantom to wireless body pack
« Reply #2 on: August 06, 2015, 02:30:14 pm »


Pages: [1]   Go Up
 



Page created in 0.044 seconds with 25 queries.