Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Wireless and Communications

UR4D, UR1 dropouts UR2 totally stable?

<< < (3/3)

Art Williams:

--- Quote from: brian maddox on August 05, 2015, 03:33:11 PM ---What were you feeding into the XLR?

--- End quote ---

Mic level program, DI'd Aux Feed.
I do this all the time with my Sennheiser stuff.
Watch to make sure I don't overdrive transmitter, etc...
Mac also used different TA4F cables, only thing not changed was 1/4 TS and DI but they also never moved so don't "think" that should have caused it.

I can't seem to recreate the problem in shop, so I guess I'll find out this weekend...running 4 RF guitars on TA4F to 1/4 cables.

brian maddox:

--- Quote from: Art Williams on August 06, 2015, 12:32:07 PM ---Mic level program, DI'd Aux Feed.
I do this all the time with my Sennheiser stuff.
Watch to make sure I don't overdrive transmitter, etc...
Mac also used different TA4F cables, only thing not changed was 1/4 TS and DI but they also never moved so don't "think" that should have caused it.

I can't seem to recreate the problem in shop, so I guess I'll find out this weekend...running 4 RF guitars on TA4F to 1/4 cables.

--- End quote ---

i asked mostly because i was wondering if perhaps there was some very high frequency content in there that was messing with the pilot tone.  i know it's a reach, but it seemed like something to at least rule out.

it'll be interesting to see if it works just fine with the 1/4" adapters....

Navigation

[0] Message Index

[*] Previous page

Go to full version