ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Instant Replay 360 Onsite Repair?  (Read 3394 times)

Loren Aguey

  • Full Member
  • ***
  • Offline Offline
  • Posts: 229
  • New York City
Instant Replay 360 Onsite Repair?
« on: October 12, 2011, 10:29:51 am »

The unit keeps freezing up and we don't have any more in the shop. I'd like to open this guy up to make sure all connections are seated properly but I can't figure out how. I'm sure that's how it was designed.

There are 4 screws that clustered underneath, not on the perimeter. I don't want to unscrew them because I'm guessing that they are securing the motherboard. I could be wrong about that just wondering if anyone has had to open one of these up.

Thanks.
Logged

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1629
Re: Instant Replay 360 Onsite Repair?
« Reply #1 on: October 12, 2011, 10:40:39 am »

Pull the rubber feet off.  You'll need a nutdriver to reach in and remove some nuts.
Logged

Loren Aguey

  • Full Member
  • ***
  • Offline Offline
  • Posts: 229
  • New York City
Re: Instant Replay 360 Onsite Repair?
« Reply #2 on: October 12, 2011, 10:49:47 am »

Pull the rubber feet off.  You'll need a nutdriver to reach in and remove some nuts.

Thanks Scott. Unfortunately I don't have a nut driver in my kit. So looks like we'll be doing live VOG's until we can get a rental in.

Logged

Charles Story

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: Instant Replay 360 Onsite Repair?
« Reply #3 on: January 25, 2016, 07:14:32 pm »

I am looking for someone who can repair IR 360. The factory thinks I have a hard drive problem (but) they do not repair these anymore. I have pulled the drive and know what type to get but after that I am afraid I am lost.
Logged
Charles Story

Charles Story

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: Instant Replay 360 Onsite Repair?
« Reply #4 on: January 25, 2016, 07:17:53 pm »

The unit keeps freezing up and we don't have any more in the shop. I'd like to open this guy up to make sure all connections are seated properly but I can't figure out how. I'm sure that's how it was designed.

There are 4 screws that clustered underneath, not on the perimeter. I don't want to unscrew them because I'm guessing that they are securing the motherboard. I could be wrong about that just wondering if anyone has had to open one of these up.

Thanks.


TO OEPN IR 360.... Caution*** Can be difficult to get back together.First to open an INSTANT REPLAY you will need the following tools
 
         5/16 nut driver or socket with an extension and ratchet
         A flat blade screw diver
         A Philips screwdriver
 
First remove the 3 rubber feet on the bottom front of the I/R with the flat blade screw driver, Once the feet have been removed use your 5/16 nut driver or socket with the extension to remove 3 nuts that are inside the I/R. Once you have removed the 3 nuts tilt the top panel open and push the chassis away from you and pull the top panel towards you. After youve unplugged all the cables from the main board use the Phillips screw drives to remove the 4 screws on the bottom center of the I/R to remove your hard drive.
 
Logged
Charles Story

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6885
  • Audio Plumber
Posting Rules
« Reply #5 on: January 25, 2016, 07:26:12 pm »

I am looking for someone who can repair IR 360.
Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
Logged

Charles Story

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: Posting Rules
« Reply #6 on: January 25, 2016, 08:01:41 pm »

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac

I apologize. The first time I tried It would not let me use the name Charles but it did this time.
Logged
Charles Story

Clay Roe

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: Instant Replay 360 Onsite Repair?
« Reply #7 on: August 25, 2018, 02:51:50 am »

Here's a way to open the 360 Instant Replay, and replace the SCSI drive with an SD card...

http://www.notla.com/archives/2018/08/replacing-my-360-systems-instant-replay-scsi-hard-drive-with-a-memory-card/
Logged

Ray Aberle

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 3434
  • Located in Vancouver, WA (and serves OR-WA-ID-BC)
    • Kelcema Audio
Re: Instant Replay 360 Onsite Repair?
« Reply #8 on: August 25, 2018, 12:02:33 pm »

Here's a way to open the 360 Instant Replay, and replace the SCSI drive with an SD card...

Did you not notice the post just two above you talking about the Real Display Name policy?!?

Please return to your Profile and update your Display Name to reflect your Real, Full Name, to be able to participate on the ProSoundWeb forums!

Thanks,

Ray
Logged
Kelcema Audio
Regional - Serving Pacific Northwest (OR, WA, ID, BC)

ProSoundWeb Community

Re: Instant Replay 360 Onsite Repair?
« Reply #8 on: August 25, 2018, 12:02:33 pm »


Pages: [1]   Go Up
 



Page created in 0.047 seconds with 25 queries.