ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: QU-16 how to get extra L/R outs  (Read 1018 times)

james page

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 57
QU-16 how to get extra L/R outs
« on: June 30, 2015, 01:38:53 pm »

I need to run one extra speaker and I want it to be a mono mix of the main L/R outs. How can i get one of the mix outputs to do this so that whenever a change is made in the main mix it would also occur in the mono mix?
Also, I would strongly prefer it be XLR and not one of the 1/4" outs.
Thanks
Logged

g'bye, Dick Rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7424
  • Duluth
Re: QU-16 how to get extra L/R outs
« Reply #1 on: June 30, 2015, 01:48:27 pm »

I need to run one extra speaker and I want it to be a mono mix of the main L/R outs. How can i get one of the mix outputs to do this so that whenever a change is made in the main mix it would also occur in the mono mix?
Also, I would strongly prefer it be XLR and not one of the 1/4" outs.
Thanks

You use the Alt Out configured to be L+R.  Loosen up that death-grip on your wallet and get a couple of TRS>XLRM pigtails.  Otherwise you'll have a much more complicated and cumbersome routing and extra work.
Logged
Pay no attention to the man behind the curtain...

james page

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 57
Re: QU-16 how to get extra L/R outs
« Reply #2 on: June 30, 2015, 02:21:35 pm »

You use the Alt Out configured to be L+R.  Loosen up that death-grip on your wallet and get a couple of TRS>XLRM pigtails.  Otherwise you'll have a much more complicated and cumbersome routing and extra work.
Thanks Dick. I'm sure I have the adaptors kicking around somewhere, I just always avoid using them if there is a more direct way. Maybe not in this case.
Logged

james page

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 57
Re: QU-16 how to get extra L/R outs
« Reply #3 on: June 30, 2015, 02:48:07 pm »

Ah. Even easier than I thought. I can set those alt outs to mono/post master fader. Just a TRS to XLR cable and I'm good to go.
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Online Online
  • Posts: 21472
  • Wichita, Kansas USA
Re: QU-16 how to get extra L/R outs
« Reply #4 on: June 30, 2015, 03:20:49 pm »

Ah. Even easier than I thought. I can set those alt outs to mono/post master fader. Just a TRS to XLR cable and I'm good to go.

That's what Dick was trying to tell you.  /nudge, wink
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

ProSoundWeb Community

Re: QU-16 how to get extra L/R outs
« Reply #4 on: June 30, 2015, 03:20:49 pm »


Pages: [1]   Go Up
 



Page created in 0.049 seconds with 23 queries.