ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: ¿Easiest way to delay to Aux on x32  (Read 12436 times)

Earl F Young

  • Full Member
  • ***
  • Offline Offline
  • Posts: 197
  • location: Surface of the SUN. az/ ca
¿Easiest way to delay to Aux on x32
« on: June 03, 2015, 10:58:04 AM »

Gotta get a delay speaker assigned to buss. So used to a&h just having it on output setup per channel...

Suggestions? THANKS!
Logged

Brian Adams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
    • Adams Production Services
Re: ¿Easiest way to delay to Aux on x32
« Reply #1 on: June 03, 2015, 11:10:47 AM »

I think output delays are on the analog/XLR output page in the routing menu, but don't quote me on it.
Logged
Brian Adams
Adams Production Services
Vermillion, SD
adamsproductionservices.com

Corey Scogin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1266
  • Birmingham, AL, US
Re: ¿Easiest way to delay to Aux on x32
« Reply #2 on: June 03, 2015, 11:21:34 AM »

I think output delays are on the analog/XLR output page in the routing menu, but don't quote me on it.

That's correct.

Routing -> Out 1-16 tab
Logged

Earl F Young

  • Full Member
  • ***
  • Offline Offline
  • Posts: 197
  • location: Surface of the SUN. az/ ca
Re: ¿Easiest way to delay to Aux on x32
« Reply #3 on: June 03, 2015, 11:55:41 AM »

So, I can delay aux/es  then?  ;D

Thanks again!
That's correct.

Routing -> Out 1-16 tab
Logged

Art Nadelman

  • Full Member
  • ***
  • Offline Offline
  • Posts: 214
Re: ¿Easiest way to delay to Aux on x32
« Reply #4 on: June 03, 2015, 03:48:27 PM »

So, I can delay aux/es  then?  ;D

Thanks again!

You've said auxes and busses.  2 different things on the X32.

If you want to delay the auxes, no.  If you want to delay the XLR outputs 1-16 assigned to busses, yes.  Go to the Routing Menu, Out 1-16 tab.  On the bottom right you will see the delay button.  Turn it on for the specific output and then adjust the delay as needed (just above the button).
Logged

George Dougherty

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 725
Re: ¿Easiest way to delay to Aux on x32
« Reply #5 on: June 03, 2015, 04:06:56 PM »

You've said auxes and busses.  2 different things on the X32.

If you want to delay the auxes, no.  If you want to delay the XLR outputs 1-16 assigned to busses, yes.  Go to the Routing Menu, Out 1-16 tab.  On the bottom right you will see the delay button.  Turn it on for the specific output and then adjust the delay as needed (just above the button).

To clarify the terminology, you can delay the out 1-16 signals on the Routing pages.  These can be assigned to local XLR outs, recorded to card outputs or sent over AES50. 

The aux out 1-6 signals have no delay function as of 2.10. These route to TRS outs on all but the Core products, or can be assigned everywhere the out 1-16 signals can go.  XLR outs, card outs or AES50 channels.
Logged

Corey Scogin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1266
  • Birmingham, AL, US
Re: ¿Easiest way to delay to Aux on x32
« Reply #6 on: June 03, 2015, 04:20:47 PM »

The routing scheme on the X32 is quite convoluted and the terminology sometimes confusing.  It's pretty flexible once you understand how to use it though.
Logged

Mark Wilkinson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1104
Re: ¿Easiest way to delay to Aux on x32
« Reply #7 on: June 03, 2015, 05:19:07 PM »

The routing scheme on the X32 is quite convoluted and the terminology sometimes confusing.  It's pretty flexible once you understand how to use it though.

Thanks, seems convoluted to me too.
Not to hi-jack the thread, but is there a way to route matrix outputs back through the mixer ( to gain more eq filters post matrix) ?
I'm using the matrix-out as x-overs, but loose two of the available 6 filters for each side of x-over used...
Logged

Corey Scogin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1266
  • Birmingham, AL, US
Re: ¿Easiest way to delay to Aux on x32
« Reply #8 on: June 03, 2015, 05:27:31 PM »

Thanks, seems convoluted to me too.
Not to hi-jack the thread, but is there a way to route matrix outputs back through the mixer ( to gain more eq filters post matrix) ?
I'm using the matrix-out as x-overs, but loose two of the available 6 filters for each side of x-over used...

No, but you could insert a 31-band graphic.

Sounds like you need a dedicated system processor.

What do you need that many filters for? 
Logged

Mark Wilkinson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1104
Re: ¿Easiest way to delay to Aux on x32
« Reply #9 on: June 03, 2015, 05:39:33 PM »

No, but you could insert a 31-band graphic.

Sounds like you need a dedicated system processor.

What do you need that many filters for?

Yes thanks, wish i could afford the system processor I want....a big lake. 
It's for experimentation, trying to dial in some multi-way passives as best as can.
Logged

ProSoundWeb Community

Re: ¿Easiest way to delay to Aux on x32
« Reply #9 on: June 03, 2015, 05:39:33 PM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.028 seconds with 22 queries.