Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Don Davis]

Another major problem with the unit is that the dynamics processing occurs immediately following the input, and is therefore always audible in the aux outputs. I mentioned this to a QSC rep who seemed incredulous at first, but then confirmed that this was indeed the case. I heard through the grapevine that this also might be something addressed in a new firmware revision. I hope it is, because compression in the monitors drives most singers nuts.

It looks like the new firmware is out and has addressed some of the issues:

"New features include:
Support for password protected, multi-level security access
Expanded Wi-Fi options (including wired connection to an infrastructure router)
Programability of User Buttons
More options for auxiliary mix pick-off points
Expanded channel presets
Updated iOS app
Personal monitor mix application for both iPhone and iPod Touch
Operator may limit or allow access on a per-device basis
iPhone control of the record/playback transport controls and programmable user buttons
Android support (coming soon)
TouchMix v2.0 software standard on new TouchMix-16 and TouchMix-8 models and available as a free download at QSC.com for existing TouchMix owners."

I plan on talking to the folks at the QSC booth at NAMM before I pull the trigger.

[John Roll]

I have not noticed this on my TM16.  However, Chris Brouelette  posted this on QSC's forum: Firmware V2.0 will be released Jan 22, 2015.

I like my TM16, it works great for Ceremonies & Cocktail bands.  I haven't worked with a Bar Band on it, but at first... it maybe a little slow like any other digital console setting up for the first time.

My only issue with the supplied console is the USB Network thingy, it has a very limited range.  However, that can be easily fixed with a WiFi Network box.

Matt,
What do you mean by limited range? 25'? 30'? 50'?

John

[John Roll]

It looks like the new firmware is out and has addressed some of the issues:

"New features include:
Support for password protected, multi-level security access
Expanded Wi-Fi options (including wired connection to an infrastructure router)
Programability of User Buttons
More options for auxiliary mix pick-off points
Expanded channel presets
Updated iOS app
Personal monitor mix application for both iPhone and iPod Touch
Operator may limit or allow access on a per-device basis
iPhone control of the record/playback transport controls and programmable user buttons
Android support (coming soon)
TouchMix v2.0 software standard on new TouchMix-16 and TouchMix-8 models and available as a free download at QSC.com for existing TouchMix owners."

I plan on talking to the folks at the QSC booth at NAMM before I pull the trigger.

Don,
Did you clarify the "more options for aux pick off points"? Does that include "pre everything"?
John

[frank kayser]

Don,
Did you clarify the "more options for aux pick off points"? Does that include "pre everything"?
John

I regularly use the TM16 via the WiFi dongle at 40' with no interruption, despite bring directly beneath a 600mw WiFi access point (12' ceiling mounted).  I was not expecting that performance.


The new menu does have "Pre All", "Pre-Dyn", "Pre-Fader", and "Post Fader" options.


frank

[Don Davis]

Don,
Did you clarify the "more options for aux pick off points"? Does that include "pre everything"?
John

Sorry, been quite busy, yes as Frank said Pre options are there now.
I have one on its way, can't wait to try it out.

[John Roll]

I regularly use the TM16 via the WiFi dongle at 40' with no interruption, despite bring directly beneath a 600mw WiFi access point (12' ceiling mounted).  I was not expecting that performance.


The new menu does have "Pre All", "Pre-Dyn", "Pre-Fader", and "Post Fader" options.


frank

Frank, that's great news. After seeing this thread I went to the QSC forum for the Touchmix. There are more than a few posts about lockups and other weirdness that gave me chills. (I just had a lockup with my SL1642 that forced me to send it in for service) What's your experience?

[John Roll]

Frank, that's great news. After seeing this thread I went to the QSC forum for the Touchmix. There are more than a few posts about lockups and other weirdness that gave me chills. (I just had a lockup with my SL1642 that forced me to send it in for service) What's your experience?

BTW,
Someone in the Lounge commented on how it looked like the weight of the snake would pull it off of the surface it sat on. I currently have a copper snake and if I go this route the iPAD would be forthcoming. Will the TM16 handle the weight of the cable?

John

[frank kayser]

BTW,
Someone in the Lounge commented on how it looked like the weight of the snake would pull it off of the surface it sat on. I currently have a copper snake and if I go this route the iPAD would be forthcoming. Will the TM16 handle the weight of the cable?

John

John,
I have not had any type of lockup in the month we've owned it - I've used it for the in-house gigs at least 15 times.  I may have had a momentary drop in WiFi connection maybe 10 times at most.


The unit is more substantial than it looks - a fair amount of weight - I was actually a bit surprised.
That being said, put enough weight on the connectors, it will tip.
I have it on the top of an "upright" piano, and as long as I keep it 2"  or so from the edge, I do not have a problem with it tipping.  I think if there is any transition from the mixer to the edge, that will take enough cable weight/force vector to be fine.  The feet seem soft enough to grip, and not slip.
The cables I use are not a snake, but individual cables that drop to the stage deck about 4 feet - two mains cables and two aux cables, and at the most so far 12 channels.  The two main cables have a short jumper as the house cables have right angle connectors on them - so there is also the weight of t pairs of connectors unsupported.  If the cables or snake were to have a six or eight foot unsupported drop (vs my four), that would be a problem.
On a regular table, it isn't going anywhere.  I wish I could compare the stability to say, a Mackie 1608, but I can't.


I was very apprehensive of the non-standard power connector - but after seeing it and handling it, I've come away with a pretty good feeling that it is solid, and will not be a problem.  A caution is that the connector is quite tight, and could frustrate someone in a hurry to disconnect - I can guarantee that yanking on the cord will not disconnect the connector.  It feels more robust than a standard IEC connection.


Hope that helps.
frank

[David Elthorpe]

It looks like the new firmware is out and has addressed some of the issues:

"New features include:
Support for password protected, multi-level security access
Expanded Wi-Fi options (including wired connection to an infrastructure router)
Programability of User Buttons
More options for auxiliary mix pick-off points
Expanded channel presets
Updated iOS app
Personal monitor mix application for both iPhone and iPod Touch
Operator may limit or allow access on a per-device basis
iPhone control of the record/playback transport controls and programmable user buttons
Android support (coming soon)
TouchMix v2.0 software standard on new TouchMix-16 and TouchMix-8 models and available as a free download at QSC.com for existing TouchMix owners."

I plan on talking to the folks at the QSC booth at NAMM before I pull the trigger.

[ProSoundWeb Community]