Out setup as follows:
Clear-Com MS 702
Director Headset into headset input of MS 702
Clear-Com Ab 120 #1
Headset into Clear Com ab 120
XLR splitter from mic out. One end is sent to Tricaster XLR input and the other end goes to the other Ab 120 #2 IFB.
Male XLR end into Intercom/Talkback of AB 120 to Intercom Channel B input of the MS-702
Female XLR end into other Intercom/Talkback of AB 120 to other AB 120 Intercom/Talkback
Clear-Com Ab 120 #2
Headset into Clear Com ab 120
XLR splitter from mic out. One end is sent to Tricaster XLR input and the other end goes to the other Ab 120 #1 IFB.
We've recently replaced our headsets. Having trouble with wiring for the 6-pin connection. The director headset signal appears faintly on program out when pushing talk on the MS702. This problem didn't occur with our old headsets.
Let me know if anybody has suggestions on wiring for 6-pin. Would also like to hear if our setup is flawed in anyway. Ex..implementing an external mixer