ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Need FBT HiMaxx Woofer!  (Read 3038 times)

Dustin Coval

  • Newbie
  • *
  • Offline Offline
  • Posts: 11
Need FBT HiMaxx Woofer!
« on: May 12, 2015, 04:39:37 PM »

I need to replace the 12" driver on my FBT Hi-Maxx40a powered cabinet.   I know it's a B&C woofer, but not sure which model.  Does anyone know anything on this, before I pay a ridiculous amount directly to FBT-USA for a replacement driver?   

Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9534
  • Atlanta GA
Re: Need FBT HiMaxx Woofer!
« Reply #1 on: May 24, 2015, 09:23:30 PM »

I need to replace the 12" driver on my FBT Hi-Maxx40a powered cabinet.   I know it's a B&C woofer, but not sure which model.  Does anyone know anything on this, before I pay a ridiculous amount directly to FBT-USA for a replacement driver?
Do you have a photo or any numbers that are on the driver?

B&C makes a lot of custom drivers for various manufacturers, while other use standard-off the shelf drivers.

B&C drivers are typically not "inexpensive".

More information would help to "narrow it down"

Of course even if it looks the same as a standard driver on the outside-it could be hard to tell if it is custom on the inside.

Maybe if you cut it apart and post some photos, and those could be compared to other "known" B&C drivers.

To at least narrow it down to possible model numbers
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

ProSoundWeb Community

Re: Need FBT HiMaxx Woofer!
« Reply #1 on: May 24, 2015, 09:23:30 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.032 seconds with 22 queries.