ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: backup power supply for church audio  (Read 1113 times)

Alo Kent

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
backup power supply for church audio
« on: April 21, 2015, 04:38:49 am »

Our church goes through frequent power cuts during service which presents problem for both audio operation and congregation as well. A standby genset cannot start instantly. I am planning to install another auxillary power supply by way of inverter with batteries which can give atleast 10 minutes backup. Specs/details for the audio setup:-
1. FOH speakers - 928LA JBL - 4 nos (2 each for left/right)
2. Monitor - JBL MRX 512 - 2 nos
3. Mixer - GB4 - 24 channel
4. Computer set
5. DI box - 2nos
6. Crown Amplifier xti4002 - 1no
7. Crown amplifier xls 2002 - 1no
8. EQ 231s - dbx - 1no
9. Dirverack dbx 260 - 1no

would appreciate if anyone can help me out with this.
Alo Kent R
Logged

Doug Fowler

  • Member since May 1995, 2nd poster on original LAB, moderator on and off since 1997, now running TurboMOD v1.826
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1783
  • Saint Louis, MO USA
Re: backup power supply for church audio
« Reply #1 on: April 21, 2015, 11:41:06 am »

Read the rules, fix your display name.

Thank you for your cooperation.
Logged
"It's got electrolytes.  It's got what plants crave."

ProSoundWeb Community

Re: backup power supply for church audio
« Reply #1 on: April 21, 2015, 11:41:06 am »


Pages: [1]   Go Up
 



Page created in 0.07 seconds with 24 queries.