ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Direct Box for Headway The Band Violin Pickup System  (Read 6455 times)

John Roberts {JR}

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 16358
  • Hickory, Mississippi, USA
    • Resotune
Re: Direct Box for Headway The Band Violin Pickup System
« Reply #20 on: April 12, 2015, 01:05:32 pm »

http://forums.prosoundweb.com/index.php/topic,151663.msg1390673.html#msg1390673

I don't know if this linked thread is instructive, but just about any active input DI will have a very high inherent input impedance, often using a resistor termination to define the input Z lower. In the above case we were able to raise the input impedance to 3M for use with a piezo transducer by swapping out the termination resistor.

JR 
Logged
Listen to what a properly "cleared" drum sounds like.   http://circularscience.com/
Pages: 1 2 [3]  All   Go Up
 


Page created in 0.039 seconds with 21 queries.