ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Bi-Amping suggestion on my QRX 115, QRX 218 & CAMCO AMPS  (Read 944 times)

Chris Immanuel Hutagalung

  • Newbie
  • *
  • Offline Offline
  • Posts: 29
Bi-Amping suggestion on my QRX 115, QRX 218 & CAMCO AMPS
« on: March 12, 2015, 11:24:02 pm »

Hi Good Audio Folks out there,

I have a QRX 115 and CAMCO D-POWER 1 and D-POWER 2 laying around and i want to experiment on Bi-Amping that QRX 115 top. I am planning to use DP1 for the HF and DP2 for the LF. So the problem here is i dont have 4 conductor speaker cable.

The routing in my opinions is as follows,

1. Connecting DP1 in stereo mode for the HF for the L and R of the QRX Using 2 conductor speaker with NL2. (The D-POWER 1&2 Accepts NL4)
2. Connecting DP2 in stereo mode for the LF for the L and R of the QRX Using 2 conductor speaker with NL2.
3. Combine that two cable together in a NL4 and set the QRX into biamp position.

Or any other suggestion or opinion to make this method better?
What suggested Frequencies for the HF and LF as a good starting point in my DSP Processor?
Im sorry this kinda a newbie question but I am still learning.
Logged

Ray Aberle

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 3417
  • Located in Vancouver, WA (and serves OR-WA-ID-BC)
    • Kelcema Audio
Re: Bi-Amping suggestion on my QRX 115, QRX 218 & CAMCO AMPS
« Reply #1 on: March 13, 2015, 12:09:47 am »

Sorry, silly question; have you contacted EV to see what they suggest for processor settings?
Logged
Kelcema Audio
Regional - Serving Pacific Northwest (OR, WA, ID, BC)

Chris Immanuel Hutagalung

  • Newbie
  • *
  • Offline Offline
  • Posts: 29
Re: Bi-Amping suggestion on my QRX 115, QRX 218 & CAMCO AMPS
« Reply #2 on: March 13, 2015, 12:38:14 am »

Sorry, silly question; have you contacted EV to see what they suggest for processor settings?

Yes but i have no luck contacting them.
Logged

Corey Scogin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1115
  • Birmingham, AL, US
Re: Bi-Amping suggestion on my QRX 115, QRX 218 & CAMCO AMPS
« Reply #3 on: March 13, 2015, 12:59:36 am »

Yes but i have no luck contacting them.

Here are the two files that I got from EV back when I had the QRx 115/218 setup.  The first is for the 115 by itself and the second is for the 115 with the 218.

https://docs.google.com/spreadsheet/ccc?key=0Alxj6JiS3mztdDFvb3FGaEx4Mlpla3lSeTNoSC1hMnc&usp=sharing

https://drive.google.com/file/d/0B1xj6JiS3mztMGZhYTUwN2QtYTc3Mi00NTk0LWFhZTAtYTRhZDk0MmQ3M2Ex/view?usp=sharing

*note: That 2nd link was not initially shared properly.  I updated it to make it public.
« Last Edit: March 13, 2015, 10:13:58 am by Corey Scogin »
Logged

ProSoundWeb Community

Re: Bi-Amping suggestion on my QRX 115, QRX 218 & CAMCO AMPS
« Reply #3 on: March 13, 2015, 12:59:36 am »


Pages: [1]   Go Up
 



Page created in 0.051 seconds with 23 queries.