ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Behringer X32 S16 interruption with fully clipped signal  (Read 1353 times)

Taylor Wynn

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Behringer X32 S16 interruption with fully clipped signal
« on: February 23, 2015, 10:53:32 pm »
Intermittently, I receive completely clipped out static from my inputs with signal passing through them when using the S16 stage box.  It lasts for about 10 seconds.  It happened today from a DJ using serato, and a day last week with all mic'd inputs.

Anyone else have this issue?
Logged

Corey Scogin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1139
  • Birmingham, AL, US
Re: Behringer X32 S16 interruption with fully clipped signal
« Reply #1 on: February 23, 2015, 11:13:05 pm »
Quote from: Taylor Wynn on February 23, 2015, 10:53:32 pm
Intermittently, I receive completely clipped out static from my inputs with signal passing through them when using the S16 stage box.  It lasts for about 10 seconds.  It happened today from a DJ using serato, and a day last week with all mic'd inputs.

Anyone else have this issue?

Here's a very long thread on this topic.
http://forums.prosoundweb.com/index.php?topic=143428.0
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 21003
  • Wichita, Kansas USA
Re: Behringer X32 S16 interruption with fully clipped signal
« Reply #2 on: February 23, 2015, 11:38:09 pm »
Quote from: Taylor Wynn on February 23, 2015, 10:53:32 pm
Intermittently, I receive completely clipped out static from my inputs with signal passing through them when using the S16 stage box.  It lasts for about 10 seconds.  It happened today from a DJ using serato, and a day last week with all mic'd inputs.

Anyone else have this issue?

Get thee hither to the thread Cory links.

In a nutshell the S-16/X32 combo is susceptible to ESD.  It interrupts the clock sync between the units, which produces the big popping noise.

The cure is in using shielded CAT5e with the ground wire soldered to the RJ45, and using Neutrik Ethercons that connects the shell to the RJ45 shield.  It MUST have end-to-end DC continuity between the Ethercon shells.
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

ProSoundWeb Community

Re: Behringer X32 S16 interruption with fully clipped signal
« Reply #2 on: February 23, 2015, 11:38:09 pm »

Pages: [1]   Go Up
« previous next »
 



Page created in 0.045 seconds with 22 queries.