ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Would this be correct use of a DMX Splitter?  (Read 1741 times)

Tony Rivieras

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
Would this be correct use of a DMX Splitter?
« on: February 21, 2015, 09:28:33 pm »

Hello All, Firstly i would like to say i am by no means a expert with lighting. My question is, I would like to use a DMX Splitter to go from a center truss to other pieces of truss on the left and right side of the center one. Rather than running a cable to one side and then back over the center one to the other side i was thinking of using a Splitter on the center truss and then the 2 data cables can go directly to the other sides.



is this something that would work?




Look Forward to your replies
Tony Rivieras
Logged

Cailen Waddell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1428
Re: Would this be correct use of a DMX Splitter?
« Reply #1 on: February 21, 2015, 11:29:47 pm »

Yes


Sent from my iPhone using Tapatalk
Logged

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3115
  • Toronto
Re: Would this be correct use of a DMX Splitter?
« Reply #2 on: February 22, 2015, 06:05:34 am »

Hello All, Firstly i would like to say i am by no means a expert with lighting. My question is, I would like to use a DMX Splitter to go from a center truss to other pieces of truss on the left and right side of the center one. Rather than running a cable to one side and then back over the center one to the other side i was thinking of using a Splitter on the center truss and then the 2 data cables can go directly to the other sides.



is this something that would work?




Look Forward to your replies
Tony Rivieras
It will work.
However, you now have an active piece of equipment in the air and if it fails, you are toast.
Another way to do this is home run DMX from each truss to the floor and split in a location where you can trouble shoot, if required.
Logged
I don't care enough to be apathetic

Jerome Malsack

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1330
Re: Would this be correct use of a DMX Splitter?
« Reply #3 on: February 22, 2015, 09:42:54 am »

Also dont forget the terminators.  One one each split ?
Logged

Cailen Waddell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1428
Re: Would this be correct use of a DMX Splitter?
« Reply #4 on: February 22, 2015, 11:11:50 am »


Also dont forget the terminators.  One one each split ?

Meh - terminators are over rated.  I have been toured all over the world, and run hundreds dmx devices in the various theaters I manage.  I've never had a problem that a terminator fixed.  If you use fully dmx complaint fixtures and use quality dmx cable, you should be fine.


Sent from my iPhone using Tapatalk
Logged

Josh Daws

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 335
Re: Would this be correct use of a DMX Splitter?
« Reply #5 on: February 22, 2015, 02:51:51 pm »

Meh - terminators are over rated.  I have been toured all over the world, and run hundreds dmx devices in the various theaters I manage.  I've never had a problem that a terminator fixed.  If you use fully dmx complaint fixtures and use quality dmx cable, you should be fine.

agreed, and not to mention most splitters have a terminate button on it.
Logged

Tony Rivieras

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
Re: Would this be correct use of a DMX Splitter?
« Reply #6 on: February 22, 2015, 03:34:19 pm »

It will work.
However, you now have an active piece of equipment in the air and if it fails, you are toast.
Another way to do this is home run DMX from each truss to the floor and split in a location where you can trouble shoot, if required.

Having to run it back down to the floor would be too many cables, as it is since the splitters on the truss i have to run a
Edison extension cable to power to it. As for the termination i was planning to use a terminator on each split. I'm sure it wont hurt.


Thank you
Tony
Logged

ProSoundWeb Community

Re: Would this be correct use of a DMX Splitter?
« Reply #6 on: February 22, 2015, 03:34:19 pm »


Pages: [1]   Go Up
 



Page created in 0.07 seconds with 24 queries.