ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Ferrite beads and CFL noise  (Read 1087 times)

Stephen Swaffer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2193
Ferrite beads and CFL noise
« on: February 20, 2015, 06:51:53 pm »

I posted over in the H.O.W. regarding interference in our sound system that I am sure is being generated by CFLs.  (Most likely lamps nearing end of life.)

With MIke's mention of ferrite beads here, would they be worth trying on all cables going to mixer?  We are looking at 40-50 cables-would this be  a waste of time and money or a reasonable attempt at mitigating the issue?
Steve Swaffer

Kevin Graf

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 301
Re: Ferrite beads and CFL noise
« Reply #1 on: February 20, 2015, 08:41:16 pm »

There is a lot more to ferrites than just popping one on.
Jim Brown being both past AES committee chair on EMI/RFI and a Ham radio operator, buys ferrites by the 1000 for his Ham radio group.

"RFI, Ferrites, and Common Mode Chokes For Hams"
Pages: [1]   Go Up

Page created in 0.048 seconds with 23 queries.