Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[John Roberts {JR}]

I am still working on this and ideally the human contact is not necessary (so far it still is). It looks like I can limit the sense current to micro-amps not milli-amps, but eliminating it entirely would be even better.

 but not today.

JR

[John Roberts {JR}]

OK my parts arrived to make an improved higher impedance touch buffer... I have one project on the bench ahead of this. Ideally I would like to make this not require a human touching it but that might be easier to build into a smart outlet strip than a small hand held tester. If I can get the sensitivity high enough there may be no need to touch anything.

No promises... only hopes..

JR

[Jordan Wolf]

Thanks for the update, JR. I've been following this thread with anticipation and am excited whenever there are updates.

This could be a very handy gadget for hotel world...

[John Roberts {JR}]

In the meanwhile you can do a lot with the simple neon lamp probe.

Working on my other project today but the outlet tester is still on my bucket list. 

JR

[ProSoundWeb Community]