ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2 3  All   Go Down

Author Topic: Dead Yamaha ethersound MY16-es64??? Need advice!!  (Read 11572 times)

Frederic Bergeron

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Dead Yamaha ethersound MY16-es64??? Need advice!!
« on: February 14, 2015, 03:23:36 PM »

Hi there,

just bought a used yamaha MY16-es64 with a MY16-EX.

I wanted to test them in my LS9-32. When i check in the slot setup i see in slot 2 the MY16-EX but nothing in slot 1 where my MY16-es64 is plugged... The LS9 give a sync error too on the MY16-EX card... In this setup is it the LS9 that is the clock master??

Try to see the card via Auvitran AVS-Monitor and nothing there too...

It is possible to check the card without SB168?? (I buy them later)

When i plug the MY16-es64 to my laptop via the ethersound input cat5 connector on the card my laptop connect to the card via my ethernet card. (limited network)

When the card is not connected to a SB168 it is normal that no TX/RX LED blink?

LS9 firmware : 1.33
AVS-Control panel: 4.2.8.264
MY16-es64 firmware : unknow... (where i can see that??)

Thanks a lot for your advice!
Fred
« Last Edit: February 14, 2015, 05:52:15 PM by Frederic Bergeron »
Logged

Ivan Feder

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
  • Paris, France
Re: Dead MY16-es64??? Need advice!!
« Reply #1 on: February 14, 2015, 03:52:25 PM »

Hi there,

just bought a used yamaha MY16-es64 with a MY16-EX.

I wanted to test them in my LS9-32. When i check in the slot setup i see in slot 2 the MY16-EX but nothing in slot 1 where my MY16-es64 is plugged... The LS9 give a sync error too on the MY16-EX card... In this setup is it the LS9 that is the clock master??

Try to see the card via Auvitran AVS-Monitor and nothing there too...

It is possible to check the card without SB168?? (I buy them later)

When i plug the MY16-es64 to my laptop via the ethersound input cat5 connector on the card my laptop connect to the card via my ethernet card. (limited network)

When the card is not connected to a SB168 it is normal that no TX/RX LED blink?

LS9 firmware : 1.33
AVS-Control panel: 4.2.8.264
MY16-es64 firmware : unknow... (where i can see that??)

Thanks a lot for your advice!
Fred
Your cards are probably not set up correctly, check out the user manual for more info
:http://www.yamahaproaudio.com/northamerica/en_us/downloads/manuals/?lang=en&q=MY16-ES64&product_id=1500835
« Last Edit: February 14, 2015, 03:55:22 PM by Ivan Feder »
Logged

Frederic Bergeron

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Re: Dead MY16-es64??? Need advice!!
« Reply #2 on: February 14, 2015, 04:02:36 PM »

Do you speak about the 5 onboard switch?? (They are where they should be!)

So 2 question :

1- With a working MY16-es64 are you suppose to see in setup/wordclock MY16-es64 in slot 1?

2- It is possible with AVS-Monitor to see the card even if i haven't sb168 on the network? (MY16-es64 in slot 1 and MY16-EX in slot 2)

Thanks a lot for your help guys it's very appreciated!!
Logged

Ivan Feder

  • Full Member
  • ***
  • Offline Offline
  • Posts: 119
  • Paris, France
Re: Dead MY16-es64??? Need advice!!
« Reply #3 on: February 15, 2015, 03:16:02 AM »

Do you speak about the 5 onboard switch?? (They are where they should be!)

So 2 question :

1- With a working MY16-es64 are you suppose to see in setup/wordclock MY16-es64 in slot 1?

2- It is possible with AVS-Monitor to see the card even if i haven't sb168 on the network? (MY16-es64 in slot 1 and MY16-EX in slot 2)

Thanks a lot for your help guys it's very appreciated!!
Did you do everything mentioned in this manual?
http://download.yamaha.com/api/asset/file/?language=en&site=countrysite-master.prod.wsys.yamaha.com&asset_id=47381
Logged

Frederic Bergeron

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Re: Dead MY16-es64??? Need advice!!
« Reply #4 on: February 15, 2015, 04:44:18 PM »

Already had this pdf... I tryed everything i can!!

I just want to test the card but for now i don't have sb168..

So 2 question :

- It is normal when a MY16-es64 is inserted in a LS9-32 to see nothing in the slot1? (Slot 2 where the MY16-EX are inserted show a MY16-AT but from what i've read it's normal..)

- Can you connect to the card via AVS-Monitor when the card is not plugged to SB168??

Thanks!
Logged

Bob Leonard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6807
  • Boston, MA USA
Re: Dead Yamaha ethersound MY16-es64??? Need advice!!
« Reply #5 on: February 15, 2015, 08:11:24 PM »

Frederic,
I would suggest that you try the cards one at a time to see if the problem is the card or if it is a problem having both cards in the board at the same time. If they work individually then the problem is a configuration or compatibility issue. Once you know this then the road to success will become apparent, and that road will lead to Yamaha, the reseller, or the instruction manual.
Logged
BOSTON STRONG........
Proud Vietnam Veteran

I did a gig for Otis Elevator once. Like every job, it had it's ups and downs.

Bill Hinds

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 67
Re: Dead Yamaha ethersound MY16-es64??? Need advice!!
« Reply #6 on: February 15, 2015, 09:41:26 PM »

Hi there,

just bought a used yamaha MY16-es64 with a MY16-EX.

I wanted to test them in my LS9-32. When i check in the slot setup i see in slot 2 the MY16-EX but nothing in slot 1 where my MY16-es64 is plugged... The LS9 give a sync error too on the MY16-EX card... In this setup is it the LS9 that is the clock master??

Try to see the card via Auvitran AVS-Monitor and nothing there too...

It is possible to check the card without SB168?? (I buy them later)

When i plug the MY16-es64 to my laptop via the ethersound input cat5 connector on the card my laptop connect to the card via my ethernet card. (limited network)

When the card is not connected to a SB168 it is normal that no TX/RX LED blink?

LS9 firmware : 1.33
AVS-Control panel: 4.2.8.264
MY16-es64 firmware : unknow... (where i can see that??)

Thanks a lot for your advice!
Fred

Did you check your rack and ensure you selected it?
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7562
  • Audio Plumber
Re: Dead Yamaha ethersound MY16-es64??? Need advice!!
« Reply #7 on: February 15, 2015, 10:01:29 PM »

Did you check your rack and ensure you selected it?

Rack?

If the card is not showing up it isn't working. It should not need any other hardware to mount on the console.

Mac
Logged

Frederic Bergeron

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Re: Dead Yamaha ethersound MY16-es64??? Need advice!!
« Reply #8 on: February 15, 2015, 11:38:29 PM »

Rack?

If the card is not showing up it isn't working. It should not need any other hardware to mount on the console.

Mac

Yeah this what i think! Inserting the MY16-es64 in the ls9 slot 1 and powering up the ls9 you should see a card in the slot 1 in setup/slot setup?

I read that the card should pop as a MY16-AT? (The board doesn't show the card as a MY16-es64... True???)

Thanks a lot for your advice guy!
Logged

Lee Buckalew

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 1384
  • St. Louis, MO area
    • Pro Sound Advice, Inc.
Re: Dead Yamaha ethersound MY16-es64??? Need advice!!
« Reply #9 on: February 15, 2015, 11:41:02 PM »



I read that the card should pop as a MY16-AT? (The board doesn't show the card as a MY16-es64... True???)



That all depends on how you have the various switches set on the card.

Lee
Logged
Lee Buckalew
Pro Sound Advice, Inc.

ProSoundWeb Community

Re: Dead Yamaha ethersound MY16-es64??? Need advice!!
« Reply #9 on: February 15, 2015, 11:41:02 PM »


Pages: [1] 2 3  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.039 seconds with 22 queries.