ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Flying VRX918 using M-10  (Read 1924 times)

Nitin Sidhu

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 398
  • New Delhi, India.
Flying VRX918 using M-10
« on: March 04, 2016, 08:40:58 AM »

Hello!

Install required subs to be flown, shortlist is 918. Am I correct to assume, considering there seem to be only 2 M10 holes on the box, that they are alighned to the Center of Gravity ?

Thank you all!
Sidhu
Logged
My RTA is always flat.

Ray Aberle

  • Classic LAB
  • Hero Member
  • *
  • Offline Offline
  • Posts: 3446
  • Located in Vancouver, WA (and serves OR-WA-ID-BC)
    • Kelcema Audio
Re: Flying VRX918 using M-10
« Reply #1 on: March 06, 2016, 11:14:07 AM »

Hello!

Install required subs to be flown, shortlist is 918. Am I correct to assume, considering there seem to be only 2 M10 holes on the box, that they are alighned to the Center of Gravity ?

Thank you all!
Sidhu

That would be correct. The M10 holes are immediately next to the integral VRX rigging hardware, that you'd use if you were going to utilize a VRX-AF for the suspension as opposed to the M10 holes.

-Ray
Logged
Kelcema Audio
Regional - Serving Pacific Northwest (OR, WA, ID, BC)

Benjamin Krumholz

  • Full Member
  • ***
  • Offline Offline
  • Posts: 143
Re: Flying VRX918 using M-10
« Reply #2 on: March 07, 2016, 12:14:02 PM »

Hello!

Install required subs to be flown, shortlist is 918. Am I correct to assume, considering there seem to be only 2 M10 holes on the box, that they are alighned to the Center of Gravity ?

Thank you all!
Sidhu

They are at the center of gravity for one box.. how many are you hanging are you putting VRX932 under?
Logged

Nitin Sidhu

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 398
  • New Delhi, India.
Re: Flying VRX918 using M-10
« Reply #3 on: March 08, 2016, 01:18:41 AM »

They are at the center of gravity for one box.. how many are you hanging are you putting VRX932 under?

Plan to put 3 side by side. Not with the 932. So should be ok. thank you.
Logged
My RTA is always flat.

ProSoundWeb Community

Re: Flying VRX918 using M-10
« Reply #3 on: March 08, 2016, 01:18:41 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.042 seconds with 23 queries.