The eagle has landed...
I has to steal some blue LEDs from a broken dishwasher control board to pop these...
Both pix are of my intentional RPBG test outlet.
First picture with no finger touch is Blue LED and Green LED indication power and ground present... Unfortunately it does not perceive that ground is hot, just that something it is connected.
Second picture is the near full light show. Blue and green for power and ground present, then red and yellow LEDs for RPBG
All other wiring configurations test accurately...
My ground fix no longer gives a false good ground for my one kitchen outlet with leaky impedances on the open ground (from several kitchen appliances), but I now I do get a very dim red on just that one outlet with a leaky ground. Such a conflicting dim indication when ground registers as open should be ignored but I'll keep chewing on this...
So good progress,,, Sorry about the photos but a lot of light in a tight space. The blue is kind of bright so I need to tone that down some,,but I need to see what my actual blue LEDs look like... they are due in any day now.
JR
Note: that standard tester plugged in the other hole is saying all OK for the RPBG outlets.