I'm guessing the company you mean is Artfox (not foxart).
If so, I just tried them with about a $10,000 order, I bought 6 of the "Pointy 10R" lights (Robe Pointe '3 in 1'copy cats...wash-beam-spot) and their little "USB DMX" light control box . I paid more with Art Fox by about 33-40% then I could have to other small company no name China built 10R Pointe copies, because they said they are more or less on par with Robe quality, same optics, others I was looking at were junk, they had a USA office, etc. I had a bad experience with my old 575's, the seller CKC Lighting as they stopped answering emails so I went for this USA office business
Truthfully, mixed reviews. We had what I feel to be a very big job for us, and I felt I was clear I needed them for New Years Eve. Later, he said they should still be able to ship by New Years. Say what?
?? Only ship? I said my gig was ON New Years and I was clear. So.... no lights. Then, after they didn't show up .....they didn't even ship by New Years anyways
I also was led to felt I was a very small order, that my 6 units with cases wasn't jack, so I felt I was 2nd priority to others. They never said that, but it seemed implied
When they came, they put their Artfox logo all over the sides of the cases where I was going to put our logo. Not a huge deal, but wasn't mentioned. And funny, most rubbed off
After they arrived, I was told NOT to put the light on full power when using it as a white spot with a GOBO, and don't hold that for more then a few seconds, as it would actually melt the metal gobo but they said "as this design just like Robe then Robe have same problem". Again, not a huge deal but I would of preferred to know of the issue first not after the sale
I used these lights just 2 times now, and I will say they can crank. We had notice when they first came one of the gobos were loose rolling around inside, as the snap ring that held the gobo in the wheel had snapped or something. I told the sales guy and they sent the replacement parts very fast, so that part was excellent
The 2nd time we used them, my light tech thinks we had a few they had sticky shutters that were acting "off", but it was very cold outdoor event, maybe 10 degrees, snow everywhere. As we are busy as heck, we still don't know if this is an actual issue as we are too busy to test them (soon!!) but if the light gets hot enough to melt a metal gobo, we shall see if any shutter issue was due to cold weather or not
My light tech is a smart kid...real good with computers....but he is still kind of working on the usb dmx box to get it to work with some of it's applications. Instruction need to be better, if he has a issue, as good as he is, they need to get that more user friendly
