ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: non-linear NL4  (Read 2592 times)

Hayden J. Nebus

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 637
  • Richmond, VA
non-linear NL4
« on: November 14, 2014, 05:00:00 PM »

I'd like to share this curiosity. Linked are traces showing axial response of a single array element. One measurement with each of the boxes two parallel NL4 connectors, and a known good box overlaid (in the deeper shade of salmon) as a reference trace. The reference box has a wider dispersion waveguide, hence the more ragged magnitude response.

Note the HF phase response departure on the suspect connector. When measuring the array we were absolutely certain we had a compression driver out of polarit . I now suspect a failed solder joint.

https://docs.google.com/file/d/0B0pQLbAUdKDhVWt5bmpyR1JzTkU/edit?usp=docslist_api

A new connector plate is inbound from the manufacturer, who has provided fantastic support this far, and would like the bad connector back for analysis.
Logged

ProSoundWeb Community

non-linear NL4
« on: November 14, 2014, 05:00:00 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.023 seconds with 25 queries.