ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Wireless mic adaptor  (Read 6610 times)

Jason Glass

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 835
    • CleanWirelessAudio.com
Re: Wireless mic adaptor
« Reply #20 on: November 02, 2014, 09:01:55 pm »

SKP-100 G3 does not supply phantom.
SKP-300 G3 will supply phantom.

OK, back to the subject at hand.  Bill is correct.  http://en-us.sennheiser.com/plug-on-transmitter-wired-wireless-microphone-skp-300

If you'd like to stay with Sennheiser products and require 48V phantom power, these models will also do it, albeit at higher cost:
http://en-us.sennheiser.com/wireless-microphone-plug-on-transmitter-skp-2000
http://en-us.sennheiser.com/wireless-microphone-live-audio-plug-on-transmitter-skp-3000

If you're already equipped with Shure UR receivers, you can use this, which will do switchable +12VDC or +48VDC phantom:
http://www.shure.com/americas/products/wireless-systems/uhfr-systems/ur3-plug-on-wireless-microphone-transmitter

Thomas Le

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 824
Re: Wireless mic adaptor
« Reply #21 on: November 02, 2014, 09:19:07 pm »

Recently came across the Alesis Miclink Wireless... which converts any xlr based dynamic mic into wireless.  Very reasonably priced - about 60 in the UK - but I have no idea what they sound like.  Anyone got any experience of these? Do they colour the sound?  Introduce latency?  etc etc?

Here's a link to the Alesis page:
https://www.alesis.com/miclink-wireless

Strange that the output is a jack socket instead of xlr?

Many thanks.
Kev

What do you need to send out wirelessly? If its outputs, try an IEM system. If its inputs, probably your favorite mic brand has a wireless option available.

Either way, don't skimp on wireless.
Logged

ProSoundWeb Community

Re: Wireless mic adaptor
« Reply #21 on: November 02, 2014, 09:19:07 pm »


Pages: 1 2 [3]  All   Go Up
 



Page created in 0.017 seconds with 16 queries.