ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Crown iTech 6000 limiter settings  (Read 5534 times)

Ara Ayrassian

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 58
Re: Crown iTech 6000 limiter settings
« Reply #10 on: June 30, 2014, 02:55:08 pm »

While not completly locked down like the Vertec presets, the Fulcrum Acoustics presets have portions that are not user adjustable. Obviously the FIR portion, but the crossovers are fixed as well.

Can someone confirm these settings I found on the net ?I run a sm 80/TH 118 rig with a IT 6000. Just had the system tuned by one of the best in the business.

Disable the peak limiter or set it to 255v as high as it will go. The 6000 does not have enough power if run stereo to cause over excursion in the 118.

RMS limiter set to 800 watts 3 second attack and 9 second release
Logged
Danley SH96HO's 2 DBH218 powered ,SPL td-1's  Danley DSL P48 processor 2 x Danley THmini 15 subs 4 SM100's 2 SH50's and Ashly Protea 4.24C ,Crown tech 6000, Crown MA12000i QSC PLX 3602 , Crown xdi 6002, EAW JF80 x 4 Altec A6 VOTT, EVZXA1's
You can be right with a wrong spirit so listen carefully.

ProSoundWeb Community

Re: Crown iTech 6000 limiter settings
« Reply #10 on: June 30, 2014, 02:55:08 pm »


Pages: 1 [2]  All   Go Up
 



Page created in 0.027 seconds with 23 queries.