ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Need help sizing an amp  (Read 1287 times)

Tony Pubelo

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Need help sizing an amp
« on: June 02, 2014, 09:17:40 pm »

I have (6) EV MTL2B subs. Each cabinet is  loaded with the EVX180B drivers, making each cab a 4 ohm load.

 Is there an amp I can purchase to run all 6 cabs, or should I purchase multiple amps to power these cabs?

What amps do you recommend? There will be times I only run two or four.
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6599
  • Audio Plumber
Posting Rules
« Reply #1 on: June 03, 2014, 12:06:53 pm »

I have (6) EV MTL2B subs. Each cabinet is  loaded with the EVX180B drivers, making each cab a 4 ohm load.

 Is there an amp I can purchase to run all 6 cabs, or should I purchase multiple amps to power these cabs?

What amps do you recommend? There will be times I only run two or four.

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
Logged

ProSoundWeb Community

Posting Rules
« Reply #1 on: June 03, 2014, 12:06:53 pm »


Pages: [1]   Go Up
 



Page created in 0.077 seconds with 22 queries.