ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Systune 1.3 with Lake 6.2 – Help  (Read 3914 times)

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1227
Systune 1.3 with Lake 6.2 – Help
« on: April 28, 2014, 09:12:39 pm »

I have recently upgraded our LM26’s to the latest firmware and controller software Version 6.2.  I would like to integrate it with Systune 1.3 so that I can see the frequency response overlayed onto the Lake PEQ page. 

I was able to do this with WaveCapture and the old Lake controller using the Lake analyser bridge.

I can’t seem to get it to work with the new software … any suggestions.

Thanks
Peter
Logged

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1522
  • So. Dak.
    • Sturz Audio
Re: Systune 1.3 with Lake 6.2 – Help
« Reply #1 on: April 28, 2014, 10:26:22 pm »

I have recently upgraded our LM26’s to the latest firmware and controller software Version 6.2.  I would like to integrate it with Systune 1.3 so that I can see the frequency response overlayed onto the Lake PEQ page. 

I was able to do this with WaveCapture and the old Lake controller using the Lake analyser bridge.

I can’t seem to get it to work with the new software … any suggestions.

Thanks
Peter

Peter,
Have you had any contact with Bruce Olsen? He is the guy I always end up talking to for AFMG questions.  Doug Fowler, a mod here may also be a good resource.
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1227
Re: Systune 1.3 with Lake 6.2 – Help
« Reply #2 on: April 29, 2014, 12:12:13 am »

Peter,
Have you had any contact with Bruce Olsen? He is the guy I always end up talking to for AFMG questions.  Doug Fowler, a mod here may also be a good resource.

No, not yet. I have spoken to the Lake guys in Australia, and I was hoping Doug might be able to help from AFMG's perspective. 
Logged

Joakim Hammar

  • Newbie
  • *
  • Offline Offline
  • Posts: 16
Re: Systune 1.3 with Lake 6.2 – Help
« Reply #3 on: April 29, 2014, 06:42:04 am »

I have recently upgraded our LM26’s to the latest firmware and controller software Version 6.2.  I would like to integrate it with Systune 1.3 so that I can see the frequency response overlayed onto the Lake PEQ page. 

I was able to do this with WaveCapture and the old Lake controller using the Lake analyser bridge.

I can’t seem to get it to work with the new software … any suggestions.

Thanks
Peter

As far as I'm aware only LiveCapture and SMAART are supported at the moment.

/J
Logged

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1227
Re: Systune 1.3 with Lake 6.2 – Help
« Reply #4 on: April 29, 2014, 09:11:19 am »

As far as I'm aware only LiveCapture and SMAART are supported at the moment.

/J

Hi Joakim,

Systune 1.3 has just been release and is now supported by Lake controller 6.2 , as is Smaart 7. 

Prior to that both LiveCapture and Smaart 5.6 were supported using the lake analyser bridge, however ownership changes and subsequent upgrades removed Smaart support until recently.

I remember not being very happy when I lost this function and I was being asked to pay for the upgrade .... 

http://systune.afmg.eu/index.php/read-news/items/afmg-systune-13-released.html

http://www.youtube.com/watch?v=mLyRNyONmjM
« Last Edit: April 29, 2014, 09:42:24 am by Peter Morris »
Logged

Doug Fowler

  • Member since May 1995, 2nd poster on original LAB, moderator on and off since 1997, now running TurboMOD v1.826
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1676
  • Saint Louis, MO USA
Re: Systune 1.3 with Lake 6.2 – Help
« Reply #5 on: April 29, 2014, 11:15:39 am »

I have recently upgraded our LM26’s to the latest firmware and controller software Version 6.2.  I would like to integrate it with Systune 1.3 so that I can see the frequency response overlayed onto the Lake PEQ page. 

I was able to do this with WaveCapture and the old Lake controller using the Lake analyser bridge.

I can’t seem to get it to work with the new software … any suggestions.

Thanks
Peter

Have you posted on the ST support forum?

Logged
"It's got electrolytes.  It's got what plants crave."

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1227
Re: Systune 1.3 with Lake 6.2 – Help
« Reply #6 on: April 29, 2014, 07:09:57 pm »

Have you posted on the ST support forum?

No ... I didn't know they had one  :-[. I had looked at all the Beta test email discussions and searched the web for anything I could find under Systune and Lake . I did a quick search this morning for "Systune Forum" and I found it immediately - thanks Doug I will give it a go.

FWIW I think it could be an API issue.

In the mean time I have reinstated Smaart 5 and the analyser bridge, however I would still appreciate any help that anyone can offer on this forum.

Peter
« Last Edit: May 03, 2014, 12:16:13 am by Peter Morris »
Logged

Jelmer de Jong

  • Full Member
  • ***
  • Offline Offline
  • Posts: 166
Re: Systune 1.3 with Lake 6.2 – Help
« Reply #7 on: April 30, 2014, 06:08:38 pm »

Try it with Smaart 7, if it works the problem is with Systune, if it also doesn't work I suspect the Lake software or something with a firewall.
Logged

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1227
Re: Systune 1.3 with Lake 6.2 – Help
« Reply #8 on: May 03, 2014, 04:08:32 am »

Try it with Smaart 7, if it works the problem is with Systune, if it also doesn't work I suspect the Lake software or something with a firewall.

I don't own Smaart 7 but I down loaded the Demo version - no problems, perfect!

I also tried to join the Systune forum but I could not seem to resister... and I can't find any information or instruction on how to use Systune with the Lake.  :-\ :-\ :-\


« Last Edit: May 03, 2014, 09:24:01 pm by Peter Morris »
Logged

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1227
Re: Systune 1.3 with Lake 6.2 – Help
« Reply #9 on: May 05, 2014, 08:52:56 am »

Peter,
Have you had any contact with Bruce Olsen? He is the guy I always end up talking to for AFMG questions.  Doug Fowler, a mod here may also be a good resource.

You were correct ... this is where I ended up. Excellent customer service from Bruce & Frank.

Peter
Logged
Pages: [1]   Go Up
 


Page created in 0.056 seconds with 22 queries.