Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Peter Morris]

I have recently upgraded our LM26’s to the latest firmware and controller software Version 6.2.  I would like to integrate it with Systune 1.3 so that I can see the frequency response overlayed onto the Lake PEQ page. 

I was able to do this with WaveCapture and the old Lake controller using the Lake analyser bridge.

I can’t seem to get it to work with the new software … any suggestions.

Thanks
Peter

[David Sturzenbecher]

I have recently upgraded our LM26’s to the latest firmware and controller software Version 6.2.  I would like to integrate it with Systune 1.3 so that I can see the frequency response overlayed onto the Lake PEQ page. 

I was able to do this with WaveCapture and the old Lake controller using the Lake analyser bridge.

I can’t seem to get it to work with the new software … any suggestions.

Thanks
Peter

Peter,
Have you had any contact with Bruce Olsen? He is the guy I always end up talking to for AFMG questions.  Doug Fowler, a mod here may also be a good resource.

[Peter Morris]

Peter,
Have you had any contact with Bruce Olsen? He is the guy I always end up talking to for AFMG questions.  Doug Fowler, a mod here may also be a good resource.

No, not yet. I have spoken to the Lake guys in Australia, and I was hoping Doug might be able to help from AFMG's perspective. 

[Joakim Hammar]

I have recently upgraded our LM26’s to the latest firmware and controller software Version 6.2.  I would like to integrate it with Systune 1.3 so that I can see the frequency response overlayed onto the Lake PEQ page. 

I was able to do this with WaveCapture and the old Lake controller using the Lake analyser bridge.

I can’t seem to get it to work with the new software … any suggestions.

Thanks
Peter

As far as I'm aware only LiveCapture and SMAART are supported at the moment.

/J

[Peter Morris]

As far as I'm aware only LiveCapture and SMAART are supported at the moment.

/J

Hi Joakim,

Systune 1.3 has just been release and is now supported by Lake controller 6.2 , as is Smaart 7. 

Prior to that both LiveCapture and Smaart 5.6 were supported using the lake analyser bridge, however ownership changes and subsequent upgrades removed Smaart support until recently.

I remember not being very happy when I lost this function and I was being asked to pay for the upgrade .... 

http://systune.afmg.eu/index.php/read-news/items/afmg-systune-13-released.html

http://www.youtube.com/watch?v=mLyRNyONmjM

[Doug Fowler]

I have recently upgraded our LM26’s to the latest firmware and controller software Version 6.2.  I would like to integrate it with Systune 1.3 so that I can see the frequency response overlayed onto the Lake PEQ page. 

I was able to do this with WaveCapture and the old Lake controller using the Lake analyser bridge.

I can’t seem to get it to work with the new software … any suggestions.

Thanks
Peter

Have you posted on the ST support forum?

[Peter Morris]

Have you posted on the ST support forum?

No ... I didn't know they had one  . I had looked at all the Beta test email discussions and searched the web for anything I could find under Systune and Lake . I did a quick search this morning for "Systune Forum" and I found it immediately - thanks Doug I will give it a go.

FWIW I think it could be an API issue.

In the mean time I have reinstated Smaart 5 and the analyser bridge, however I would still appreciate any help that anyone can offer on this forum.

Peter

[Jelmer de Jong]

Try it with Smaart 7, if it works the problem is with Systune, if it also doesn't work I suspect the Lake software or something with a firewall.

[Peter Morris]

Try it with Smaart 7, if it works the problem is with Systune, if it also doesn't work I suspect the Lake software or something with a firewall.

I don't own Smaart 7 but I down loaded the Demo version - no problems, perfect!

I also tried to join the Systune forum but I could not seem to resister... and I can't find any information or instruction on how to use Systune with the Lake. 

[Peter Morris]

Peter,
Have you had any contact with Bruce Olsen? He is the guy I always end up talking to for AFMG questions.  Doug Fowler, a mod here may also be a good resource.

You were correct ... this is where I ended up. Excellent customer service from Bruce & Frank.

Peter

[ProSoundWeb Community]