ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Studio Six Digital - Audio Tools + Transfer Function in app purchase.  (Read 2651 times)

Lyle Williams

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1558

For some time I've been looking for a source independent transfer function application, but I've been too much of a tight-ass to buy Smaart.

Yesterday I bought the Audio Tools app for my ipad, and got the transfer function extension.  About $100 together.

It seems to work well.  I'm using the apple usb camera kit and it works on my ipad3 and ipad mini.

The interface I am using is the art usb dual pre.  As phantom power isn't switchable per-interface my original signal line in comes through a 1/4 plug; I've also jammed some plastic shims in the sides of the xlr socket to prevent accidental xlr insertion in the future.

My measurement mics have been a generic omni sdc, and a dbx m2.  The m2 was a bit weird until I built a mic calibration file for it from a plot in an AES powerpoint presentation.  The m2 has a huge peak at the high end.
Logged

ProSoundWeb Community


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.021 seconds with 23 queries.