For the LIFE of me I can't figure this out...
Has anyone tried using daw through Adobe Audition for Mac via firewire with the console having local inputs and S16 snake inputs? I can only seem to get either local to go through, or just the snake inputs...not both.
The console is AES50 A1-8...local 9-16...AES50 A17-24...and AES50 A25-32.
Also, how do I route my bus console fx to the software? I don't want a dry mix and I definitely don't want to recreate fx using the software. The x32 card seems very limited.
Looking at the offline X32-Edit app on my Mac it appears that under routing the Expansion Card can be assigned whatever sets of 8 inputs/outputs you want(though it may be different on the console). It let me assign AES50 A1-8, Local 9-16, AES50 A17-24, and AES50 A25-32 seemingly w/out problems.
As far as getting the effects into the computer it looks like the effects would have to be sent to a physical output then that physical output sent to the card in routing. Also if you can't afford to use a whole bank of 8 channels into the computer just for effects you might send all the effects busses to a matrix then send the matrix to some physical output; then you could hard patch the physical output(s) back into a (couple of) channel(s) that only get sent to the card.
Anyway hope this helps; I'm far from an x32 expert, from what I've see on CSMT you probably have much more x32 time than I do.