ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: bypassing power strip switch  (Read 7441 times)

Jonathan Johnson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3079
  • Southwest Washington (state, not DC)
Re: bypassing power strip switch
« Reply #10 on: December 16, 2013, 01:58:06 am »

The hotmelt glue worked great, thanks Jay.  I didn't do a glob, I went around the perimeter of the switch. May not come off easy, but not really an issue for me.  I saw two people yesterday try to push the switches during setup for a festival :)

Sounds like a workable solution. I wouldn't do anything to defeat the breaker; it's protecting the line cord which probably has a lower ampacity than the circuit it's plugged into.
Logged
Stop confusing the issue with facts and logic!

Mike Sokol

  • Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3360
  • Lead instructor for the No~Shock~Zone
    • No~Shock~Zone Electrical Safety
Re: bypassing power strip switch
« Reply #11 on: December 18, 2013, 01:42:03 pm »

I saw two people yesterday try to push the switches during setup for a festival :)
That's too funny!!!  ;D
Logged
Mike Sokol
mike@noshockzone.org
www.NoShockZone.org

ProSoundWeb Community

Re: bypassing power strip switch
« Reply #11 on: December 18, 2013, 01:42:03 pm »


Pages: 1 [2]  All   Go Up
 



Page created in 0.039 seconds with 24 queries.