Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Timothy J. Trace]

Greetings --

I've a drummer buddy who sings through a CM-311A on an LX4.  The RF system has died and he wants to cable the mic until he can afford a new one.

Can I gin up a TA4MBX-to-AA3M adapter?  AKA a mini XLR 4-pin male to XLR 3-pin male?

Thanks ----

[David Sturzenbecher]

You will need the crown pack specifically, putting 48V to capsule will toast it. Sorry I don't know if these are available separately.

[Timothy J. Trace]

Just to be clear, when the Crown mic comes as part of the Shure wireless system, the Shure beltpack is specifically matched to the mic, ie, a unique P/N? Thanks.

[TJ (Tom) Cornish]

Just to be clear, when the Crown mic comes as part of the Shure wireless system, the Shure beltpack is specifically matched to the mic, ie, a unique P/N? Thanks.

I'm pretty sure the issue is the +48v.  Most wireless bodypacks put out 12v or something like that, instead of 48.  Don't think it's a specific Shure part#.

[Jordan Wolf]

Crown has a FAQ about that.  See here http://crownaudio.com/kb/print/273/

[David Sturzenbecher]

Upon closer look the 310A is a handheld so I'm guessing you really mean 311A.

[Timothy J. Trace]

Upon closer look the 310A is a handheld so I'm guessing you really mean 311A.

Yup. Thanks.  I just modified the subject and the OP to disguise my mistake. 

[ProSoundWeb Community]