ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: CM-311A lives on!  (Read 1885 times)

Timothy J. Trace

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
CM-311A lives on!
« on: November 11, 2013, 02:45:27 am »

Greetings --

I've a drummer buddy who sings through a CM-311A on an LX4.  The RF system has died and he wants to cable the mic until he can afford a new one.

Can I gin up a TA4MBX-to-AA3M adapter?  AKA a mini XLR 4-pin male to XLR 3-pin male?

Thanks ----
« Last Edit: November 12, 2013, 03:32:02 am by Timothy J. Trace »
Logged
-----------
Post count...whaaaaa? I ain't no newb. Search for my name in the LAB Archives.  :)

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1618
  • So. Dak.
    • Sturz Audio
Re: CM-310A lives on!
« Reply #1 on: November 11, 2013, 08:15:24 am »

You will need the crown pack specifically, putting 48V to capsule will toast it. Sorry I don't know if these are available separately.
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Timothy J. Trace

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Re: CM-310A lives on!
« Reply #2 on: November 11, 2013, 04:10:11 pm »

Just to be clear, when the Crown mic comes as part of the Shure wireless system, the Shure beltpack is specifically matched to the mic, ie, a unique P/N? Thanks.
Logged
-----------
Post count...whaaaaa? I ain't no newb. Search for my name in the LAB Archives.  :)

TJ (Tom) Cornish

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4283
  • St. Paul, MN
Re: CM-310A lives on!
« Reply #3 on: November 11, 2013, 04:30:48 pm »

Just to be clear, when the Crown mic comes as part of the Shure wireless system, the Shure beltpack is specifically matched to the mic, ie, a unique P/N? Thanks.
I'm pretty sure the issue is the +48v.  Most wireless bodypacks put out 12v or something like that, instead of 48.  Don't think it's a specific Shure part#.
Logged

Jordan Wolf

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1357
  • Location: Collingswood, NJ
Re: CM-310A lives on!
« Reply #4 on: November 11, 2013, 10:43:36 pm »

Crown has a FAQ about that.  See here http://crownaudio.com/kb/print/273/
Logged
Jordan Wolf
<><

"We want our sound to go into the soul of the audience, and see if it can awaken some little thing in their minds... Cause there are so many sleeping people." - Jimi Hendrix

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1618
  • So. Dak.
    • Sturz Audio
Re: CM-310A lives on!
« Reply #5 on: November 11, 2013, 11:07:25 pm »

Upon closer look the 310A is a handheld so I'm guessing you really mean 311A.
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Timothy J. Trace

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Re: CM-310A lives on!
« Reply #6 on: November 12, 2013, 03:26:05 am »

Upon closer look the 310A is a handheld so I'm guessing you really mean 311A.

Yup. Thanks.  I just modified the subject and the OP to disguise my mistake.  :)
« Last Edit: November 12, 2013, 03:33:01 am by Timothy J. Trace »
Logged
-----------
Post count...whaaaaa? I ain't no newb. Search for my name in the LAB Archives.  :)

ProSoundWeb Community

Re: CM-310A lives on!
« Reply #6 on: November 12, 2013, 03:26:05 am »


Pages: [1]   Go Up
 



Page created in 0.038 seconds with 23 queries.