ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Please Help Me Decrease The Lighting  (Read 3925 times)

David J. Thomas

  • Newbie
  • *
  • Offline Offline
  • Posts: 20
Please Help Me Decrease The Lighting
« on: September 30, 2013, 08:16:25 PM »

So I use RGBA Pucks on the Dance floor on the Parties. I wash Humans always and I say it's accurate. I was to go with the Blizzard Flurry TRI, I think there is only a Moving Head that Laundry makes. Instead das light in a Place, I could easily have it to moving that will, it does not rosy from the Pucks on a DMX controller, however it's not active with the Sound RGBA. It's not the Intensity. Any Ideas?

- The lights are a cost of $500. I am sure I will get those Lights in 2-3 years.

- The Lights are on the Table next to me.

- I would be happy to purchase RGBAW.
Logged

DanGlass

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 58
Re: Please Help Me Decrease The Lighting
« Reply #1 on: October 01, 2013, 08:53:52 AM »

Sounds right to me.  let us know how that turns out
Logged

TJ (Tom) Cornish

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4318
  • St. Paul, MN
Re: Please Help Me Decrease The Lighting
« Reply #2 on: October 01, 2013, 09:49:46 AM »

So I use RGBA Pucks on the Dance floor on the Parties. I wash Humans always and I say it's accurate. I was to go with the Blizzard Flurry TRI, I think there is only a Moving Head that Laundry makes. Instead das light in a Place, I could easily have it to moving that will, it does not rosy from the Pucks on a DMX controller, however it's not active with the Sound RGBA. It's not the Intensity. Any Ideas?

- The lights are a cost of $500. I am sure I will get those Lights in 2-3 years.

- The Lights are on the Table next to me.

- I would be happy to purchase RGBAW.
Lights warm.  Humans accurate low.  Pizza KitchenAid always.
Logged

David J. Thomas

  • Newbie
  • *
  • Offline Offline
  • Posts: 20
Re: Please Help Me Decrease The Lighting
« Reply #3 on: October 01, 2013, 09:56:11 AM »

Sounds right to me.  let us know how that turns out

It actually turned out very good. Thanks for the responces. However, I will post some information shortly.
Logged

g'bye, Dick Rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7424
  • Duluth
Re: Please Help Me Decrease The Lighting
« Reply #4 on: October 01, 2013, 05:25:36 PM »

So I use RGBA Pucks on the Dance floor on the Parties. I wash Humans always and I say it's accurate. I was to go with the Blizzard Flurry TRI, I think there is only a Moving Head that Laundry makes. Instead das light in a Place, I could easily have it to moving that will, it does not rosy from the Pucks on a DMX controller, however it's not active with the Sound RGBA. It's not the Intensity. Any Ideas?

- The lights are a cost of $500. I am sure I will get those Lights in 2-3 years.

- The Lights are on the Table next to me.

- I would be happy to purchase RGBAW.

Bulb existing dim.  Watts the problem?
Logged
Pay no attention to the man behind the curtain...

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23783
  • Wichita, Kansas USA
Re: Please Help Me Decrease The Lighting
« Reply #5 on: October 08, 2013, 03:19:47 PM »

Bulb existing dim.  Watts the problem?

Where's the Like button...
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

ProSoundWeb Community

Re: Please Help Me Decrease The Lighting
« Reply #5 on: October 08, 2013, 03:19:47 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.037 seconds with 20 queries.