ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: maxing spl of EVs using mid bass and HP filter  (Read 1714 times)

Kevin Tracy

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 71
maxing spl of EVs using mid bass and HP filter
« on: September 27, 2013, 08:32:23 AM »
How much more spl can I get from a zlx 12p if I add a midbass 15 and high pass the EV @ about 200hz?
Logged

g'bye, Dick Rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7424
  • Duluth
Re: maxing spl of EVs using mid bass and HP filter
« Reply #1 on: September 27, 2013, 08:39:24 AM »
Quote from: Kevin Tracy on September 27, 2013, 08:32:23 AM
How much more spl can I get from a zlx 12p if I add a midbass 15 and high pass the EV @ about 200hz?

None.

You'll get a bit more from the entire system by adding a mid-bass cabinet.  But the 12p will still only put out the same amount of sound.  It will not be "louder" although it may be more effective in a more limited role. 
Logged
Pay no attention to the man behind the curtain...

kel mcguire

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 381
Re: maxing spl of EVs using mid bass and HP filter
« Reply #2 on: September 27, 2013, 12:27:26 PM »
Quote from: dick rees on September 27, 2013, 08:39:24 AM
None.

You'll get a bit more from the entire system by adding a mid-bass cabinet.  But the 12p will still only put out the same amount of sound.  It will not be "louder" although it may be more effective in a more limited role.

the 12 in that thing goes down pretty low. Add another set perhaps, or upgrade to a stronger model.
Logged

ProSoundWeb Community

Re: maxing spl of EVs using mid bass and HP filter
« Reply #2 on: September 27, 2013, 12:27:26 PM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.029 seconds with 25 queries.