ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Yorkville LP-LED4  (Read 10022 times)

Ryan Day

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Yorkville LP-LED4
« on: September 19, 2013, 11:13:18 am »

Does anyone here have any experience with this unit? 

http://yorkville.com/lighting/lp_series/product/lp-led4/

I'm trying to determine how this would stack up versus going with 4 individual fixtures, presumably from Blizzard.  Maybe something like 4 RokBoxes.
Logged

Tim Weaver

  • Hero Member
  • *****
  • Online Online
  • Posts: 2860
  • College Station, Texas
    • Daniela Weaver Photography
Re: Yorkville LP-LED4
« Reply #1 on: September 19, 2013, 01:05:23 pm »

Does anyone here have any experience with this unit? 

http://yorkville.com/lighting/lp_series/product/lp-led4/

I'm trying to determine how this would stack up versus going with 4 individual fixtures, presumably from Blizzard.  Maybe something like 4 RokBoxes.

Each "pod" has 4 quad-color LED's in it. The Blizzard lights have many more LED per fixture. One way to compare LED fixtures is to look at their total power consumption. IOW, the Yorkville states that it is a 270 watt fixture. Each Rok box draws 140 watts. So by doing that fuzzy math, you can expect 2 rok box's to be pretty equivalent in output.

That doesn't tell the whole story though. What do you want these lights to do? Wide wash to light up as much as possible? Or narrow beams to add some effect to the show?

The only thing I can see using the Yorkville thing for is if you only want to buy one light yet still hit every band member with it. Since you can individually aim four heads this becomes easier.
Logged
Bullwinkle: This is the amplifier, which amplifies the sound. This is the Preamplifier which, of course, amplifies the pree's.

Ryan Day

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Re: Yorkville LP-LED4
« Reply #2 on: September 19, 2013, 01:19:38 pm »

Each "pod" has 4 quad-color LED's in it. The Blizzard lights have many more LED per fixture. One way to compare LED fixtures is to look at their total power consumption. IOW, the Yorkville states that it is a 270 watt fixture. Each Rok box draws 140 watts. So by doing that fuzzy math, you can expect 2 rok box's to be pretty equivalent in output.

That doesn't tell the whole story though. What do you want these lights to do? Wide wash to light up as much as possible? Or narrow beams to add some effect to the show?

The only thing I can see using the Yorkville thing for is if you only want to buy one light yet still hit every band member with it. Since you can individually aim four heads this becomes easier.

Agreed. The Yorkville lights would be setup on tripods to light up the stage and members of the band. I'm not sure if the narrower beam pattern (13 degrees) is better, but if we purchased 4 of these units under haze it might look really nice. 

But the Yorkvilles are not cheap. ($1449 online, plus another $150 per pod for DMX control) So obviously, the bang-for-buck comes into play, hence the comparison to Blizzard or other alternatives.

Logged

Josh Daws

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 335
Re: Yorkville LP-LED4
« Reply #3 on: September 19, 2013, 09:30:37 pm »

Does anyone here have any experience with this unit? 

http://yorkville.com/lighting/lp_series/product/lp-led4/

I'm trying to determine how this would stack up versus going with 4 individual fixtures, presumably from Blizzard.  Maybe something like 4 RokBoxes.

way over priced. well built product tho. for $1500 bucks you can get 4 x Chauvet SlimPar QUAD 6 IRC for around $250 each and Martin MPC USB Box. which will give  you all the control you need.

The other thing that i don't like with this product is that unless you spend approx $500 more for the DMX option card (not $150 per pod as previously stated)  the unit is completely proprietary. personally a complete waste of money...the fixtures i mentioned are superior to the Yorkville Pods, in regards to brightness and even the colors...and very sturdily built!
Logged

duane massey

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1645
Re: Yorkville LP-LED4
« Reply #4 on: September 19, 2013, 11:04:00 pm »

The negatives outweigh the positives on these fixtures, IMHO. Better choices for less money from several manufacturers.
Logged
Duane Massey
Technician, musician, stubborn old guy
Houston, Texas

Jim Turner

  • Full Member
  • ***
  • Offline Offline
  • Posts: 130
  • Calgary, Alberta... Canada eh!
Re: Yorkville LP-LED4
« Reply #5 on: September 20, 2013, 07:05:47 am »

These are very common here in Canada.
Yorkville is the in house built brand of Long & McQuade, a LARGE Canadian chain music store.
These are aimed at their rental market...
L & M have cornered the small dry rental nich nation wide by renting everything from speakers on sticks, backline and even projectors & screens at silly low prices. Lighting was their next step.
I doubt they even care if they sell any as they rent these out by the boat load every weekend. VERY bright and super durable... perfect for dry rentals.
Go see a Pub band anywhere here in Canada and chances are you'll see a "Danley designed" Yorkville speaker system and a few of these.
Cheers!
« Last Edit: September 20, 2013, 01:33:01 pm by cyriljamesturner »
Logged
smile & wave...

Richard Turner

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 551
Re: Yorkville LP-LED4
« Reply #6 on: September 20, 2013, 09:58:12 am »



They are a pro built unit, and the stand alone purpose built contorller works well, you would be looking at something from elation to compare with for light output, its a true 4 color LED per head. I'd classify it more as a wash light as the light output is quite harsh at close distances. I certainly wouldnt want to be proforming with it focused on me at any closer than 12' or so. It runs on a proprietary signal protocol but they do hace a dmx convertor available at extra cost ($150). the old 4 head par 56 cans can run off the new controller and the old lp608 can run the new led heads in crippled mode, you can adjust the dimming but not adjust colors on the fly with it . it can do a stand alone static scene, theres a knob for color of each head on the bar.

there are 2 controllers available the LPC4 is a pedalboard type similar to the ols lp608 ~$350 good for making the bass player do lights but its going to clone each head as its only a 4 head controller and the LPC12 ~$425 is a 12 head controller so you can make it do more elaborate chases etc. which can be foot controlled with a guitar amp pedal

That said its a perfect system for what it was designed for, rugged case, idiot proof set up, run a mic cord to the controll box, twiddle a few knobs instant light show. I think 2 lights controller, 2 stands and a couple 50' mic cords daily rental is about $100 out the door at any long - mcquade in canada. I know they killed my rentals to bands when they opend up locally, at their prices it wasnt worthwhile as they put in all new gear and let people put rentals on accounts. is it woth about $4k for the kit? possibly possibly not but if theres a market there for 80 nights rent annually at$75 a night thats only a payback time of 9 months, thats a no brainer in my books especially on somethin with a 2 year no questions asked warranty.


If its what your client wants and can handle its the right product. I know a lot of gigging bands wouldnt want a bunch of blizzard pucks and cables everywhere, these are very simple, 2 wash bars on the floor, 2 extra mic cables and a few knobs to twiddle, most of them glaze over once you get past explaining how to recall a scene on a dmx controller.

Logged
Looking at retiring. Local PA market has shrank to 2 guys with guitars and bose l1 compacts or expecting full line array and 16 movers on stage for $300... no middle left going back to event DJ stuff, half the work for twice the pay.

Ryan Day

  • Newbie
  • *
  • Offline Offline
  • Posts: 6
Re: Yorkville LP-LED4
« Reply #7 on: September 20, 2013, 02:53:41 pm »

Great feedback from those with hands-on experience with these Yorkies.  Curious, it looks like the overall brightness level can be controlled on each unit.  Would that be post-DMX?  It would be great to be able the leave the light board scene programming alone, and simply increase the brightness on the units for stages where more light is needed.
Logged

Josh Daws

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 335
Re: Yorkville LP-LED4
« Reply #8 on: September 20, 2013, 06:54:24 pm »

The negatives outweigh the positives on these fixtures, IMHO. Better choices for less money from several manufacturers.

why would anyone ever buy anything that is a proprietary system that is designed to work with their own systems only...and to integrate it into another system you have to pay extra...yorkville just designed this product poorly...
Logged

Josh Daws

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 335
Re: Yorkville LP-LED4
« Reply #9 on: September 20, 2013, 06:58:31 pm »

Great feedback from those with hands-on experience with these Yorkies.  Curious, it looks like the overall brightness level can be controlled on each unit.  Would that be post-DMX?  It would be great to be able the leave the light board scene programming alone, and simply increase the brightness on the units for stages where more light is needed.

yes its possible....with a controller...for memory our need a controller of some sort (i could be wrong on this though)
Logged

ProSoundWeb Community

Re: Yorkville LP-LED4
« Reply #9 on: September 20, 2013, 06:58:31 pm »


Pages: [1] 2  All   Go Up
 



Page created in 0.043 seconds with 18 queries.