ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Hw can i get the phase of every speaker for a theatre system via smaart 7?  (Read 3056 times)

Only Wang

  • Newbie
  • *
  • Offline Offline
  • Posts: 1

hi everybody Am new guy here, who could help me to figure it out? ;D
Logged

Arthur Skudra

  • SR Forums
  • Full Member
  • *
  • Offline Offline
  • Posts: 160
Re: Hw can i get the phase of every speaker for a theatre system via smaart 7?
« Reply #1 on: September 05, 2013, 02:34:51 PM »

hi everybody Am new guy here, who could help me to figure it out? ;D
Phase is only one of several parameters used in evaluating a loudspeaker system.  More info is needed so that responses are more helpful for your situation.  Describe the equipment your measuring (what kind of speaker, where it's placed), the room you're in, and your measurement equipment and setup as well, and what you plan to do with the information (your goals for the speaker system).
Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9534
  • Atlanta GA
Re: Hw can i get the phase of every speaker for a theatre system via smaart 7?
« Reply #2 on: September 05, 2013, 08:26:01 PM »

hi everybody Am new guy here, who could help me to figure it out? ;D
"Getting the phase response" is not exactly an easy thing-especially in an install in a room.

There will be all sorts of boundaries that the sound will bounce off of and give a different phase response-depending on the location of the mic.

Knowing what you are actually trying to achieve would help greatly in getting responses that can actually help you.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

Adam Black

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
    • Rational Acoustics
Re: Hw can i get the phase of every speaker for a theatre system via smaart 7?
« Reply #3 on: September 06, 2013, 09:36:05 AM »

hi everybody Am new guy here, who could help me to figure it out? ;D

Sounds to me like your intent is to check the polarity of each speaker. In either case a good starting point would be to review the help file. It contains an overview which you may find helpful.
Logged

ProSoundWeb Community

Re: Hw can i get the phase of every speaker for a theatre system via smaart 7?
« Reply #3 on: September 06, 2013, 09:36:05 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.025 seconds with 26 queries.