Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[theo mack]

I need to cut the TA4F connectors off a bunch of Shure wl184 Lav mics and re-solder 1/8th minis on to use the mics with a Sennheiser EW500 series RF beltpack.

Anyone done this recently and remember the pinout?

Thanks,
Theo

[Corey Scogin]

I need to cut the TA4F connectors off a bunch of Shure wl184 Lav mics and re-solder 1/8th minis on to use the mics with a Sennheiser EW500 series RF beltpack.

Anyone done this recently and remember the pinout?

Thanks,
Theo

I looked this up recently and found this topic:
http://forums.prosoundweb.com/index.php?topic=114005.0

Red wire to tip and black & shield to the sleeve.  No connection to the ring.

I haven't done it yet so I can't verify. 

[theo mack]

I looked this up recently and found this topic:
http://forums.prosoundweb.com/index.php?topic=114005.0
I haven't done it yet so I can't verify.

Thank You.

[Jens Palm Bacher]

I looked this up recently and found this topic:
http://forums.prosoundweb.com/index.php?topic=114005.0
I haven't done it yet so I can't verify.

The ring should be shorted to the sleeve!

[Jason Lavoie]

I need to cut the TA4F connectors off a bunch of Shure wl184 Lav mics and re-solder 1/8th minis on to use the mics with a Sennheiser EW500 series RF beltpack.

Anyone done this recently and remember the pinout?

Thanks,
Theo

Countryman has a detailed list of how to wire their mics for the various brands of packs. http://www.countryman.com/wireless-transmitter-wiring
It doesn't tell you specifically how to convert from one to the other, but all the info is there for you to cross-reference and figure it out.

Jason

[ProSoundWeb Community]