ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Yamaha M7CL Question.  (Read 1361 times)

TomBoisseau

  • Full Member
  • ***
  • Offline Offline
  • Posts: 199
Yamaha M7CL Question.
« on: May 17, 2013, 12:10:26 pm »

I'm in the middle of working a show, and I need a quick answer.  I'm not using the mono fader and I would like to assign it to control mix 16.  I seem to remember that it is doable.  Some one please tell me how.

Thanks,
Tom
Logged

boburtz

  • SR Forums
  • Sr. Member
  • *
  • Offline Offline
  • Posts: 270
  • San Francisco Bay Area
    • SoundWizard Productions
Re: Yamaha M7CL Question.
« Reply #1 on: May 17, 2013, 12:19:44 pm »

I'm in the middle of working a show, and I need a quick answer.  I'm not using the mono fader and I would like to assign it to control mix 16.  I seem to remember that it is doable.  Some one please tell me how.

Thanks,
Tom
I think the only way to do this is to assign mix 16 to the mono bus, and use the mono assigned output for mix 16.
Logged

TomBoisseau

  • Full Member
  • ***
  • Offline Offline
  • Posts: 199
Re: Yamaha M7CL Question.
« Reply #2 on: May 17, 2013, 02:59:45 pm »

I think the only way to do this is to assign mix 16 to the mono bus, and use the mono assigned output for mix 16.

REALLY!  Well that's disappointing.  Thanks

Tom
Logged

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1371
Re: Yamaha M7CL Question.
« Reply #3 on: May 17, 2013, 04:41:14 pm »

You can't move faders on an M7CL, that's part of the philosophy.  You can use a master fader for cue wedge, and that took a couple years to get.
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6508
  • Audio Plumber
Re: Yamaha M7CL Question.
« Reply #4 on: May 17, 2013, 09:48:51 pm »

REALLY!  Well that's disappointing.  Thanks

Tom

If you're not using the mono bus, what's wrong with assigning mix 16 (or any other) to the mono output to get master control of 1 mix without having to use the CL fader bay? How is direct control any different?

Mac
Logged
Pages: [1]   Go Up
 


Page created in 0.042 seconds with 23 queries.