ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: unbalance stereo to balanced mono adapter?  (Read 10779 times)

Adam Wh3tham

  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • Grand Forks, ND
unbalance stereo to balanced mono adapter?
« on: May 10, 2013, 04:50:09 PM »

Is there any other little adapter like the RDL TX-J2 that has phoenix connectors on both sides?  I really don't want to be soldering resistors in the back of the install rack, as its rather cramped.

I keep finding some great little bits that are causing some headaches. Installer just took the left and right signal and twisted them together...
Logged
I practice safe excursion on the weekends

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1966
  • So. Dak.
    • Sturz Audio
Re: unbalance stereo to balanced mono adapter?
« Reply #1 on: May 10, 2013, 04:52:47 PM »

Is there any other little adapter like the RDL TX-J2 that has phoenix connectors on both sides?  I really don't want to be soldering resistors in the back of the install rack, as its rather cramped.

I keep finding some great little bits that are causing some headaches. Installer just took the left and right signal and twisted them together...

This gets you close...
http://www.rapcohorizon.com/p-376-tdiblox.aspx


edit...nevermind, i miss-read your request...
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3667
  • Toronto
Logged
I don't care enough to be apathetic

Adam Wh3tham

  • Full Member
  • ***
  • Offline Offline
  • Posts: 132
  • Grand Forks, ND
Re: unbalance stereo to balanced mono adapter?
« Reply #4 on: May 13, 2013, 01:57:32 PM »

So I'll take that as a no.... Dang it, Guess its soldering up resistors in the back of the rack. :(

Closest I found was this guy

EDIT:

Found another option. This guy I can throw Phoenix connectors on the other side and i'll be set.
Thanks for the idea's though.
http://www.atlassound.com/Product/1756/1654/AMPLIFIERS/ACCESSORIES/AA-YSUM
« Last Edit: May 13, 2013, 02:53:43 PM by Adam Whetham »
Logged
I practice safe excursion on the weekends

Hal Bissinger/COMSYSTEC

  • Full Member
  • ***
  • Offline Offline
  • Posts: 233
    • COMSYSTEC
Re: unbalance stereo to balanced mono adapter?
« Reply #5 on: May 13, 2013, 04:23:36 PM »

Dunno, if it was me I would take a few minutes and build my own out of a small enclosure and Phoenix connectors, especially if I needed more than one. They should go pretty quick once you design and assemble the first one.
 
-Hal
Logged

Scott Carneval

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
    • Precision Audio
Re: unbalance stereo to balanced mono adapter?
« Reply #6 on: May 15, 2013, 04:24:51 PM »

Dunno, if it was me I would take a few minutes and build my own out of a small enclosure and Phoenix connectors, especially if I needed more than one. They should go pretty quick once you design and assemble the first one.
 
-Hal

Doesn't use phoenix connectors, but they are screw down barrier strips.

http://www.rdlnet.com/product.php?page=82
Logged

Ray Cerwinski

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Re: unbalance stereo to balanced mono adapter?
« Reply #7 on: May 16, 2013, 05:21:17 AM »

Doesn't use phoenix connectors, but they are screw down barrier strips.

http://www.rdlnet.com/product.php?page=82

I think this would be closer to what he's looking for...

http://www.rdlnet.com/product.php?page=53

...but it's still an active product that would require a power supply and is most likely overkill and out of budget if there are a substantial amount of sources that must be summed down.
« Last Edit: May 16, 2013, 05:22:58 AM by Ray Cerwinski »
Logged
Ray Cerwinski

Arthur Skudra

  • SR Forums
  • Full Member
  • *
  • Offline Offline
  • Posts: 160
« Last Edit: May 16, 2013, 01:27:51 PM by Arthur Skudra »
Logged

Hal Bissinger/COMSYSTEC

  • Full Member
  • ***
  • Offline Offline
  • Posts: 233
    • COMSYSTEC
Re: unbalance stereo to balanced mono adapter?
« Reply #9 on: May 16, 2013, 04:18:03 PM »

Maybe one of these?

http://www.edcorusa.com/c/40/cbseries

OR

http://www.edcorusa.com/c/44/s2mseries

Looks like Arthur wins the prize with the S2M-E! Tell him what he's won Adam!

-Hal
Logged

ProSoundWeb Community

Re: unbalance stereo to balanced mono adapter?
« Reply #9 on: May 16, 2013, 04:18:03 PM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.021 seconds with 22 queries.