ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Yamaha CL series and cobranet  (Read 1395 times)

David Sturzenbecher

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1712
  • So. Dak.
    • Sturz Audio
Yamaha CL series and cobranet
« on: April 29, 2013, 05:32:43 pm »

I am looking to integrate a Yamaha CL desk into an existing cobranet installation. I would think there would be serious clocking issues, but the Yamaha calculator says the MY16-CII is a safe combination. Does the CL surface simply clock it's entire Dante world off of the slot input and life is peachy?
Logged
Audio Systems Design Engineer
Daktronics, Inc.
CTS-D, CTS-I
AES Full Member

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6867
  • Audio Plumber
Re: Yamaha CL series and cobranet
« Reply #1 on: April 29, 2013, 06:02:57 pm »

I am looking to integrate a Yamaha CL desk into an existing cobranet installation. I would think there would be serious clocking issues, but the Yamaha calculator says the MY16-CII is a safe combination. Does the CL surface simply clock it's entire Dante world off of the slot input and life is peachy?

Unless you can let the MY card be the master clock for the network, yes, the CL-5 will clock off the Cobranet network, and the Dante network will clock off the CL-5. The MY16-CII has no SRC capability.

Mac
Logged

Frederik RosenkjŠr

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 475
Re: Yamaha CL series and cobranet
« Reply #2 on: April 30, 2013, 04:21:05 am »

Does the CL surface simply clock it's entire Dante world off of the slot input and life is peachy?

Yes - at least that's how it works when I clock my CL to Rocknet via MY-slots. And it works fine.
Logged
Affiliations: Danley Sound Labs, Yamaha (MI)

Dan Brown

  • SR Forums
  • Newbie
  • *
  • Offline Offline
  • Posts: 19
Re: Yamaha CL series and cobranet
« Reply #3 on: May 09, 2013, 10:02:56 am »

I am looking to integrate a Yamaha CL desk into an existing cobranet installation. I would think there would be serious clocking issues, but the Yamaha calculator says the MY16-CII is a safe combination. Does the CL surface simply clock it's entire Dante world off of the slot input and life is peachy?

We helped with a demo where we used 2 rio boxes along with 3 cobranet cards in the desk.  The client had a M7 previously.  Everything worked fine with no issues.
Very easy changeover.

db
Logged

ProSoundWeb Community

Re: Yamaha CL series and cobranet
┬ź Reply #3 on: May 09, 2013, 10:02:56 am ┬╗


Pages: [1]   Go Up
 



Page created in 0.024 seconds with 23 queries.