ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: Paper on power grounding for audio and video systems  (Read 42140 times)

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7551
  • Audio Plumber
Paper on power grounding for audio and video systems
« on: April 03, 2013, 12:35:28 AM »

SurgEx has put up a paper authored by Jim Brown on electrical systems for audio and video.

It covers a lot of bases and was contributed to by a who's who experts (besides Jim Brown) including Bill Whitlock, Bruce Olson, Pat Brown, and the late Neil Muncy. It doesn't get much better than that group on that topic.

Mac
Logged

Nitin Sidhu

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 398
  • New Delhi, India.
Re: Paper on power grounding for audio and video systems
« Reply #1 on: April 03, 2013, 01:55:10 AM »

SurgEx has put up a paper authored by Jim Brown on electrical systems for audio and video.

It covers a lot of bases and was contributed to by a who's who experts (besides Jim Brown) including Bill Whitlock, Bruce Olson, Pat Brown, and the late Neil Muncy. It doesn't get much better than that group on that topic.

Mac

This is great. Thank you very much!

Sidhu
Logged
My RTA is always flat.

Keith Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3667
  • Toronto
Re: Paper on power grounding for audio and video systems
« Reply #2 on: April 03, 2013, 07:31:58 AM »

Thanks Mac.
Always good to have this info on hand.
Logged
I don't care enough to be apathetic

Eric Deweese

  • SR Forums
  • Newbie
  • *
  • Offline Offline
  • Posts: 28
Re: Paper on power grounding for audio and video systems
« Reply #3 on: April 03, 2013, 09:20:19 AM »

Mainly a lurker here on the boards......... Mac, I always enjoy your posts and always learn something from them. Just wanted to say thank you very much for this resource you posted.
Logged

Frank DeWitt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1010
    • LBP DI Box
Re: Paper on power grounding for audio and video systems
« Reply #4 on: April 03, 2013, 06:25:09 PM »

This is a good paper.  It touches on using twisted pairs for the power wires (not the ground wire) in conduit as a way to reduce radiation conduits carrying power to conduits carrying audio cables (Page 26) but it doesn't mention the big advantage of those twisted power wires. They don't couple voltage to the ground wire by the "conduit transformer" effect.  This is a big cause of difference voltages between ground and ground at different points.
Logged
Not to Code

Stefan Maerz

  • Full Member
  • ***
  • Offline Offline
  • Posts: 202
  • Knoxville Tennessee
Re: Paper on power grounding for audio and video systems
« Reply #5 on: May 26, 2013, 07:11:44 PM »

Bump...

I am interested in reading this paper after rereading The Sound Reinforcement Handbook's section on grounding...I was left with the feeling that I want more.

Anyways, the link seems to have been changed. The ".pdf" extension suggests that you just click and read, however this link leads to a website requesting your location.

Can anyone help me find the paper? Thanks!
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7551
  • Audio Plumber
Re: Paper on power grounding for audio and video systems
« Reply #6 on: May 26, 2013, 07:16:27 PM »

Bump...

I am interested in reading this paper after rereading The Sound Reinforcement Handbook's section on grounding...I was left with the feeling that I want more.

Anyways, the link seems to have been changed. The ".pdf" extension suggests that you just click and read, however this link leads to a website requesting your location.

Can anyone help me find the paper? Thanks!

The link takes you to the Surgex site, click on "Education" and the paper should be the second entry.

Mac
Logged

Stefan Maerz

  • Full Member
  • ***
  • Offline Offline
  • Posts: 202
  • Knoxville Tennessee
Re: Paper on power grounding for audio and video systems
« Reply #7 on: May 26, 2013, 11:25:24 PM »

Found it. Thanks Mac!
Logged

Bryan Flick

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Paper on power grounding for audio and video systems
« Reply #8 on: April 08, 2014, 09:28:32 AM »

The link takes you to the Surgex site, click on "Education" and the paper should be the second entry.

Mac

Thanks Mac, great post.
Logged

Kellen Tyburski

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 55
    • Kellen Tyburski | Audio Engineering
Re: Paper on power grounding for audio and video systems
« Reply #9 on: April 12, 2014, 05:28:55 PM »

SurgEx has put up a paper authored by Jim Brown on electrical systems for audio and video.

It covers a lot of bases and was contributed to by a who's who experts (besides Jim Brown) including Bill Whitlock, Bruce Olson, Pat Brown, and the late Neil Muncy. It doesn't get much better than that group on that topic.

Mac

Nice, thanks!
Logged
KT

ProSoundWeb Community

Re: Paper on power grounding for audio and video systems
« Reply #9 on: April 12, 2014, 05:28:55 PM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.039 seconds with 24 queries.