Just used those in an install as well. Would be curious to know what you did and also if you find anything. I havent tuned my set yet but will keep you posted.
Well even before looking at the frequency response in the manual, there were a few issues in the low end that I had boosted. 80-100hz had a 3dB boost. 240-750 had a wide boost of about 3.5dB. I had originally had another boost at about 7.5k but the ceiling isn't too high, 9' or so, and it worked out better that it wasn't as bright. There was also a noticeable difference between speakers in a zone that were mounted into a drywall ceiling vs ones mounted in drop-ceiling. The drywall zone had much more low end, most likely from a more solid surface it was mounted to.
YMMV but that's about what I ended up with.
Everything was controlled from a BSS BLU-100 which in turn was controlled from an AMX NI-3100 with the TP-Control ipad app.
Cheers
-Lee