ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Nicopress ?  (Read 3084 times)

Jim Crews

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 56
    • http://www.comaudsys.com
Nicopress ?
« on: March 26, 2013, 05:21:26 pm »

When hanging speakers (indoors) Static load, galvanized cable, can we use Aluminum Nicopress ever, or always copper (or zinc coated copper for Stainless)?

Thanks
Logged
 

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6877
  • Audio Plumber
Re: Nicopress ?
« Reply #1 on: March 26, 2013, 05:27:50 pm »

When hanging speakers (indoors) Static load, galvanized cable, can we use Aluminum Nicopress ever, or always copper (or zinc coated copper for Stainless)?

Thanks

According to JR Clancy Aluminum sleeves should never be used for rigging. Copper sleeves on galvanized cable, tinned copper on stainless steel according to this document.

Mac
Logged

Jim Crews

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 56
    • http://www.comaudsys.com
Re: Nicopress ?
« Reply #2 on: March 26, 2013, 06:44:29 pm »

Yes, I've read that too, but it states, "lifting loads" as in "Dynamic loads". Wasn't sure if it applied  to "static" loads as in speakers that don't move.
Guess it's always better to be safe than sorry.
Logged
 

Philip Roberts

  • Church and H.O.W. Forums
  • Full Member
  • *
  • Offline Offline
  • Posts: 190
  • South West MI
Re: Nicopress ?
« Reply #3 on: March 27, 2013, 02:08:22 am »

According to JR Clancy Aluminum sleeves should never be used for rigging. Copper sleeves on galvanized cable, tinned copper on stainless steel according to this document.
On the other hand I asked the guys at the Sapis booth at USITT last week and they said it didn't matter, and I think Bill even put a word in on this.

They were using Aluminium sleeves for their demo of the battery operated crimper.

I'd say Cooper is always safe but Aluminium probably is also

Philip
Logged

Tom Bourke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1568
    • http://www.cwalv.com
Re: Nicopress ?
« Reply #4 on: April 26, 2013, 12:58:46 am »

On the other hand I asked the guys at the Sapis booth at USITT last week and they said it didn't matter, and I think Bill even put a word in on this.

They were using Aluminium sleeves for their demo of the battery operated crimper.

I'd say Cooper is always safe but Aluminium probably is also

Philip
Perhaps the correct answer is “Only if the manufacture rates it for the intended load and safety factor.”
I have only used copper sleeves ordered from a rigging supply house for hangs that I have made my self.  Having said that most of my new safety cables come with aluminum sleeves.  I can get sleeves at the local farm supply store that I would never even think of rigging a speaker with.  I can't remember what the last set of cables I used had for ends.  But they did have the rated for lifting tag, complete with the cables rating and manufacturers name.

Keep in mind aluminum has many grades and each one has different characteristics.  I have a small milling machine.  Some aluminum is like machining taffy, other aluminum machines clean.
Logged
I have a mild form of Dyslexia that affects my ability to spell.  I do use spell checking to help but it does not always work.  My form of Dyslexia does not affect my reading.  Dyslexics of the world untie! <a href="http://www.cwalv.com" target="_blank">http://www.cwalv.com</a>

ProSoundWeb Community

Re: Nicopress ?
« Reply #4 on: April 26, 2013, 12:58:46 am »


Pages: [1]   Go Up
 



Page created in 0.061 seconds with 23 queries.