ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Microphone 1/4" output to line input?  (Read 3497 times)

Ian Batchelder

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: Microphone 1/4" output to line input?
« Reply #10 on: April 10, 2013, 11:39:02 am »

Thanks again all for the responses!  I've run into some snags and have ordered a four-channel, basic mic preamp to get the levels up.  The mixer is an analog VDJ mixer made by Numark.  I selected it as it was able to handle multiple s-video or composite cameras, and multiple audio inputs allowing me to accommodate a wider array of scenarios for our webcasting while spending very little money in comparison to professional solutions for video mixing.  The model is an AVM-02 & it's coupled with the VM03 MKII LCD system.   

I'm actually going to RCA line-level inputs.  It's a DJ mixer so it has a nice array of such inputs, and lacks elsewhere. Apologies for not being clear on that.  I am able to get the mics into the acceptable range, but EVERYTHING is cranked to the max ;)

I think this little preamp will give me just enough boost to keep everything at nice levels while keeping everything inside my portable rig.


Logged
Pages: 1 [2]  All   Go Up
 


Page created in 0.05 seconds with 21 queries.